Struct std::num::Wrapping

pub struct Wrapping<T>(pub T);

Provides intentionally-wrapped arithmetic on T.

Operations like + on u32 values is intended to never overflow, and in some debug configurations overflow is detected and results in a panic. While most arithmetic falls into this category, some code explicitly expects and relies upon modular arithmetic (e.g., hashing).

Wrapping arithmetic can be achieved either through methods like wrapping_add, or through the Wrapping<T> type, which says that all standard arithmetic operations on the underlying value are intended to have wrapping semantics.

Examples

use std::num::Wrapping;

let zero = Wrapping(0u32);
let one = Wrapping(1u32);

assert_eq!(std::u32::MAX, (zero - one).0);

Methods

impl Wrapping<usize>

pub fn count_ones(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i8> = Wrapping(-0b1000_0000);

assert_eq!(n.count_ones(), 1);

pub fn count_zeros(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i8> = Wrapping(-0b1000_0000);

assert_eq!(n.count_zeros(), 7);

pub fn leading_zeros(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(-1);

assert_eq!(n.leading_zeros(), 0);

pub fn trailing_zeros(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i8> = Wrapping(-4);

assert_eq!(n.trailing_zeros(), 2);

pub fn rotate_left(self, n: u32) -> Wrapping<usize>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn't the same operation as >>!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

pub fn rotate_right(self, n: u32) -> Wrapping<usize>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn't the same operation as <<!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

pub fn swap_bytes(self) -> Wrapping<usize>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));

pub fn from_be(x: Wrapping<usize>) -> Wrapping<usize>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from big endian to the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "big") {
    assert_eq!(Wrapping::<i64>::from_be(n), n);
} else {
    assert_eq!(Wrapping::<i64>::from_be(n), n.swap_bytes());
}

pub fn from_le(x: Wrapping<usize>) -> Wrapping<usize>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from little endian to the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "little") {
    assert_eq!(Wrapping::<i64>::from_le(n), n);
} else {
    assert_eq!(Wrapping::<i64>::from_le(n), n.swap_bytes());
}

pub fn to_be(self) -> Wrapping<usize>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to big endian from the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n);
} else {
    assert_eq!(n.to_be(), n.swap_bytes());
}

pub fn to_le(self) -> Wrapping<usize>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to little endian from the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n);
} else {
    assert_eq!(n.to_le(), n.swap_bytes());
}

pub fn pow(self, exp: u32) -> Wrapping<usize>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let x: Wrapping<i32> = Wrapping(2); // or any other integer type

assert_eq!(x.pow(4), Wrapping(16));

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

// 5 ^ 4 = 625, which is too big for a u8
let x: Wrapping<u8> = Wrapping(5);

assert_eq!(x.pow(4).0, 113);

impl Wrapping<u8>

pub fn count_ones(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i8> = Wrapping(-0b1000_0000);

assert_eq!(n.count_ones(), 1);

pub fn count_zeros(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i8> = Wrapping(-0b1000_0000);

assert_eq!(n.count_zeros(), 7);

pub fn leading_zeros(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(-1);

assert_eq!(n.leading_zeros(), 0);

pub fn trailing_zeros(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i8> = Wrapping(-4);

assert_eq!(n.trailing_zeros(), 2);

pub fn rotate_left(self, n: u32) -> Wrapping<u8>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn't the same operation as >>!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

pub fn rotate_right(self, n: u32) -> Wrapping<u8>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn't the same operation as <<!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

pub fn swap_bytes(self) -> Wrapping<u8>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));

pub fn from_be(x: Wrapping<u8>) -> Wrapping<u8>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from big endian to the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "big") {
    assert_eq!(Wrapping::<i64>::from_be(n), n);
} else {
    assert_eq!(Wrapping::<i64>::from_be(n), n.swap_bytes());
}

pub fn from_le(x: Wrapping<u8>) -> Wrapping<u8>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from little endian to the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "little") {
    assert_eq!(Wrapping::<i64>::from_le(n), n);
} else {
    assert_eq!(Wrapping::<i64>::from_le(n), n.swap_bytes());
}

pub fn to_be(self) -> Wrapping<u8>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to big endian from the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n);
} else {
    assert_eq!(n.to_be(), n.swap_bytes());
}

pub fn to_le(self) -> Wrapping<u8>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to little endian from the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n);
} else {
    assert_eq!(n.to_le(), n.swap_bytes());
}

pub fn pow(self, exp: u32) -> Wrapping<u8>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let x: Wrapping<i32> = Wrapping(2); // or any other integer type

assert_eq!(x.pow(4), Wrapping(16));

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

// 5 ^ 4 = 625, which is too big for a u8
let x: Wrapping<u8> = Wrapping(5);

assert_eq!(x.pow(4).0, 113);

impl Wrapping<u16>

pub fn count_ones(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i8> = Wrapping(-0b1000_0000);

assert_eq!(n.count_ones(), 1);

pub fn count_zeros(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i8> = Wrapping(-0b1000_0000);

assert_eq!(n.count_zeros(), 7);

pub fn leading_zeros(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(-1);

assert_eq!(n.leading_zeros(), 0);

pub fn trailing_zeros(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i8> = Wrapping(-4);

assert_eq!(n.trailing_zeros(), 2);

pub fn rotate_left(self, n: u32) -> Wrapping<u16>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn't the same operation as >>!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

pub fn rotate_right(self, n: u32) -> Wrapping<u16>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn't the same operation as <<!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

pub fn swap_bytes(self) -> Wrapping<u16>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));

pub fn from_be(x: Wrapping<u16>) -> Wrapping<u16>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from big endian to the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "big") {
    assert_eq!(Wrapping::<i64>::from_be(n), n);
} else {
    assert_eq!(Wrapping::<i64>::from_be(n), n.swap_bytes());
}

pub fn from_le(x: Wrapping<u16>) -> Wrapping<u16>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from little endian to the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "little") {
    assert_eq!(Wrapping::<i64>::from_le(n), n);
} else {
    assert_eq!(Wrapping::<i64>::from_le(n), n.swap_bytes());
}

pub fn to_be(self) -> Wrapping<u16>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to big endian from the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n);
} else {
    assert_eq!(n.to_be(), n.swap_bytes());
}

pub fn to_le(self) -> Wrapping<u16>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to little endian from the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n);
} else {
    assert_eq!(n.to_le(), n.swap_bytes());
}

pub fn pow(self, exp: u32) -> Wrapping<u16>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let x: Wrapping<i32> = Wrapping(2); // or any other integer type

assert_eq!(x.pow(4), Wrapping(16));

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

// 5 ^ 4 = 625, which is too big for a u8
let x: Wrapping<u8> = Wrapping(5);

assert_eq!(x.pow(4).0, 113);

impl Wrapping<u32>

pub fn count_ones(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i8> = Wrapping(-0b1000_0000);

assert_eq!(n.count_ones(), 1);

pub fn count_zeros(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i8> = Wrapping(-0b1000_0000);

assert_eq!(n.count_zeros(), 7);

pub fn leading_zeros(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(-1);

assert_eq!(n.leading_zeros(), 0);

pub fn trailing_zeros(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i8> = Wrapping(-4);

assert_eq!(n.trailing_zeros(), 2);

pub fn rotate_left(self, n: u32) -> Wrapping<u32>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn't the same operation as >>!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

pub fn rotate_right(self, n: u32) -> Wrapping<u32>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn't the same operation as <<!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

pub fn swap_bytes(self) -> Wrapping<u32>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));

pub fn from_be(x: Wrapping<u32>) -> Wrapping<u32>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from big endian to the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "big") {
    assert_eq!(Wrapping::<i64>::from_be(n), n);
} else {
    assert_eq!(Wrapping::<i64>::from_be(n), n.swap_bytes());
}

pub fn from_le(x: Wrapping<u32>) -> Wrapping<u32>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from little endian to the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "little") {
    assert_eq!(Wrapping::<i64>::from_le(n), n);
} else {
    assert_eq!(Wrapping::<i64>::from_le(n), n.swap_bytes());
}

pub fn to_be(self) -> Wrapping<u32>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to big endian from the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n);
} else {
    assert_eq!(n.to_be(), n.swap_bytes());
}

pub fn to_le(self) -> Wrapping<u32>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to little endian from the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n);
} else {
    assert_eq!(n.to_le(), n.swap_bytes());
}

pub fn pow(self, exp: u32) -> Wrapping<u32>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let x: Wrapping<i32> = Wrapping(2); // or any other integer type

assert_eq!(x.pow(4), Wrapping(16));

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

// 5 ^ 4 = 625, which is too big for a u8
let x: Wrapping<u8> = Wrapping(5);

assert_eq!(x.pow(4).0, 113);

impl Wrapping<u64>

pub fn count_ones(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i8> = Wrapping(-0b1000_0000);

assert_eq!(n.count_ones(), 1);

pub fn count_zeros(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i8> = Wrapping(-0b1000_0000);

assert_eq!(n.count_zeros(), 7);

pub fn leading_zeros(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(-1);

assert_eq!(n.leading_zeros(), 0);

pub fn trailing_zeros(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i8> = Wrapping(-4);

assert_eq!(n.trailing_zeros(), 2);

pub fn rotate_left(self, n: u32) -> Wrapping<u64>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn't the same operation as >>!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

pub fn rotate_right(self, n: u32) -> Wrapping<u64>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn't the same operation as <<!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

pub fn swap_bytes(self) -> Wrapping<u64>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));

pub fn from_be(x: Wrapping<u64>) -> Wrapping<u64>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from big endian to the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "big") {
    assert_eq!(Wrapping::<i64>::from_be(n), n);
} else {
    assert_eq!(Wrapping::<i64>::from_be(n), n.swap_bytes());
}

pub fn from_le(x: Wrapping<u64>) -> Wrapping<u64>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from little endian to the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "little") {
    assert_eq!(Wrapping::<i64>::from_le(n), n);
} else {
    assert_eq!(Wrapping::<i64>::from_le(n), n.swap_bytes());
}

pub fn to_be(self) -> Wrapping<u64>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to big endian from the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n);
} else {
    assert_eq!(n.to_be(), n.swap_bytes());
}

pub fn to_le(self) -> Wrapping<u64>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to little endian from the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n);
} else {
    assert_eq!(n.to_le(), n.swap_bytes());
}

pub fn pow(self, exp: u32) -> Wrapping<u64>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let x: Wrapping<i32> = Wrapping(2); // or any other integer type

assert_eq!(x.pow(4), Wrapping(16));

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

// 5 ^ 4 = 625, which is too big for a u8
let x: Wrapping<u8> = Wrapping(5);

assert_eq!(x.pow(4).0, 113);

impl Wrapping<u128>

pub fn count_ones(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i8> = Wrapping(-0b1000_0000);

assert_eq!(n.count_ones(), 1);

pub fn count_zeros(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i8> = Wrapping(-0b1000_0000);

assert_eq!(n.count_zeros(), 7);

pub fn leading_zeros(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(-1);

assert_eq!(n.leading_zeros(), 0);

pub fn trailing_zeros(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i8> = Wrapping(-4);

assert_eq!(n.trailing_zeros(), 2);

pub fn rotate_left(self, n: u32) -> Wrapping<u128>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn't the same operation as >>!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

pub fn rotate_right(self, n: u32) -> Wrapping<u128>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn't the same operation as <<!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

pub fn swap_bytes(self) -> Wrapping<u128>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));

pub fn from_be(x: Wrapping<u128>) -> Wrapping<u128>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from big endian to the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "big") {
    assert_eq!(Wrapping::<i64>::from_be(n), n);
} else {
    assert_eq!(Wrapping::<i64>::from_be(n), n.swap_bytes());
}

pub fn from_le(x: Wrapping<u128>) -> Wrapping<u128>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from little endian to the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "little") {
    assert_eq!(Wrapping::<i64>::from_le(n), n);
} else {
    assert_eq!(Wrapping::<i64>::from_le(n), n.swap_bytes());
}

pub fn to_be(self) -> Wrapping<u128>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to big endian from the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n);
} else {
    assert_eq!(n.to_be(), n.swap_bytes());
}

pub fn to_le(self) -> Wrapping<u128>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to little endian from the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n);
} else {
    assert_eq!(n.to_le(), n.swap_bytes());
}

pub fn pow(self, exp: u32) -> Wrapping<u128>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let x: Wrapping<i32> = Wrapping(2); // or any other integer type

assert_eq!(x.pow(4), Wrapping(16));

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

// 5 ^ 4 = 625, which is too big for a u8
let x: Wrapping<u8> = Wrapping(5);

assert_eq!(x.pow(4).0, 113);

impl Wrapping<isize>

pub fn count_ones(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i8> = Wrapping(-0b1000_0000);

assert_eq!(n.count_ones(), 1);

pub fn count_zeros(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i8> = Wrapping(-0b1000_0000);

assert_eq!(n.count_zeros(), 7);

pub fn leading_zeros(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(-1);

assert_eq!(n.leading_zeros(), 0);

pub fn trailing_zeros(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i8> = Wrapping(-4);

assert_eq!(n.trailing_zeros(), 2);

pub fn rotate_left(self, n: u32) -> Wrapping<isize>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn't the same operation as >>!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

pub fn rotate_right(self, n: u32) -> Wrapping<isize>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn't the same operation as <<!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

pub fn swap_bytes(self) -> Wrapping<isize>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));

pub fn from_be(x: Wrapping<isize>) -> Wrapping<isize>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from big endian to the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "big") {
    assert_eq!(Wrapping::<i64>::from_be(n), n);
} else {
    assert_eq!(Wrapping::<i64>::from_be(n), n.swap_bytes());
}

pub fn from_le(x: Wrapping<isize>) -> Wrapping<isize>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from little endian to the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "little") {
    assert_eq!(Wrapping::<i64>::from_le(n), n);
} else {
    assert_eq!(Wrapping::<i64>::from_le(n), n.swap_bytes());
}

pub fn to_be(self) -> Wrapping<isize>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to big endian from the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n);
} else {
    assert_eq!(n.to_be(), n.swap_bytes());
}

pub fn to_le(self) -> Wrapping<isize>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to little endian from the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n);
} else {
    assert_eq!(n.to_le(), n.swap_bytes());
}

pub fn pow(self, exp: u32) -> Wrapping<isize>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let x: Wrapping<i32> = Wrapping(2); // or any other integer type

assert_eq!(x.pow(4), Wrapping(16));

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

// 5 ^ 4 = 625, which is too big for a u8
let x: Wrapping<u8> = Wrapping(5);

assert_eq!(x.pow(4).0, 113);

impl Wrapping<i8>

pub fn count_ones(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i8> = Wrapping(-0b1000_0000);

assert_eq!(n.count_ones(), 1);

pub fn count_zeros(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i8> = Wrapping(-0b1000_0000);

assert_eq!(n.count_zeros(), 7);

pub fn leading_zeros(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(-1);

assert_eq!(n.leading_zeros(), 0);

pub fn trailing_zeros(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i8> = Wrapping(-4);

assert_eq!(n.trailing_zeros(), 2);

pub fn rotate_left(self, n: u32) -> Wrapping<i8>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn't the same operation as >>!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

pub fn rotate_right(self, n: u32) -> Wrapping<i8>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn't the same operation as <<!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

pub fn swap_bytes(self) -> Wrapping<i8>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));

pub fn from_be(x: Wrapping<i8>) -> Wrapping<i8>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from big endian to the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "big") {
    assert_eq!(Wrapping::<i64>::from_be(n), n);
} else {
    assert_eq!(Wrapping::<i64>::from_be(n), n.swap_bytes());
}

pub fn from_le(x: Wrapping<i8>) -> Wrapping<i8>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from little endian to the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "little") {
    assert_eq!(Wrapping::<i64>::from_le(n), n);
} else {
    assert_eq!(Wrapping::<i64>::from_le(n), n.swap_bytes());
}

pub fn to_be(self) -> Wrapping<i8>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to big endian from the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n);
} else {
    assert_eq!(n.to_be(), n.swap_bytes());
}

pub fn to_le(self) -> Wrapping<i8>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to little endian from the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n);
} else {
    assert_eq!(n.to_le(), n.swap_bytes());
}

pub fn pow(self, exp: u32) -> Wrapping<i8>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let x: Wrapping<i32> = Wrapping(2); // or any other integer type

assert_eq!(x.pow(4), Wrapping(16));

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

// 5 ^ 4 = 625, which is too big for a u8
let x: Wrapping<u8> = Wrapping(5);

assert_eq!(x.pow(4).0, 113);

impl Wrapping<i16>

pub fn count_ones(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i8> = Wrapping(-0b1000_0000);

assert_eq!(n.count_ones(), 1);

pub fn count_zeros(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i8> = Wrapping(-0b1000_0000);

assert_eq!(n.count_zeros(), 7);

pub fn leading_zeros(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(-1);

assert_eq!(n.leading_zeros(), 0);

pub fn trailing_zeros(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i8> = Wrapping(-4);

assert_eq!(n.trailing_zeros(), 2);

pub fn rotate_left(self, n: u32) -> Wrapping<i16>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn't the same operation as >>!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

pub fn rotate_right(self, n: u32) -> Wrapping<i16>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn't the same operation as <<!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

pub fn swap_bytes(self) -> Wrapping<i16>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));

pub fn from_be(x: Wrapping<i16>) -> Wrapping<i16>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from big endian to the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "big") {
    assert_eq!(Wrapping::<i64>::from_be(n), n);
} else {
    assert_eq!(Wrapping::<i64>::from_be(n), n.swap_bytes());
}

pub fn from_le(x: Wrapping<i16>) -> Wrapping<i16>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from little endian to the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "little") {
    assert_eq!(Wrapping::<i64>::from_le(n), n);
} else {
    assert_eq!(Wrapping::<i64>::from_le(n), n.swap_bytes());
}

pub fn to_be(self) -> Wrapping<i16>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to big endian from the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n);
} else {
    assert_eq!(n.to_be(), n.swap_bytes());
}

pub fn to_le(self) -> Wrapping<i16>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to little endian from the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n);
} else {
    assert_eq!(n.to_le(), n.swap_bytes());
}

pub fn pow(self, exp: u32) -> Wrapping<i16>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let x: Wrapping<i32> = Wrapping(2); // or any other integer type

assert_eq!(x.pow(4), Wrapping(16));

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

// 5 ^ 4 = 625, which is too big for a u8
let x: Wrapping<u8> = Wrapping(5);

assert_eq!(x.pow(4).0, 113);

impl Wrapping<i32>

pub fn count_ones(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i8> = Wrapping(-0b1000_0000);

assert_eq!(n.count_ones(), 1);

pub fn count_zeros(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i8> = Wrapping(-0b1000_0000);

assert_eq!(n.count_zeros(), 7);

pub fn leading_zeros(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(-1);

assert_eq!(n.leading_zeros(), 0);

pub fn trailing_zeros(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i8> = Wrapping(-4);

assert_eq!(n.trailing_zeros(), 2);

pub fn rotate_left(self, n: u32) -> Wrapping<i32>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn't the same operation as >>!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

pub fn rotate_right(self, n: u32) -> Wrapping<i32>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn't the same operation as <<!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

pub fn swap_bytes(self) -> Wrapping<i32>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));

pub fn from_be(x: Wrapping<i32>) -> Wrapping<i32>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from big endian to the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "big") {
    assert_eq!(Wrapping::<i64>::from_be(n), n);
} else {
    assert_eq!(Wrapping::<i64>::from_be(n), n.swap_bytes());
}

pub fn from_le(x: Wrapping<i32>) -> Wrapping<i32>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from little endian to the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "little") {
    assert_eq!(Wrapping::<i64>::from_le(n), n);
} else {
    assert_eq!(Wrapping::<i64>::from_le(n), n.swap_bytes());
}

pub fn to_be(self) -> Wrapping<i32>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to big endian from the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n);
} else {
    assert_eq!(n.to_be(), n.swap_bytes());
}

pub fn to_le(self) -> Wrapping<i32>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to little endian from the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n);
} else {
    assert_eq!(n.to_le(), n.swap_bytes());
}

pub fn pow(self, exp: u32) -> Wrapping<i32>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let x: Wrapping<i32> = Wrapping(2); // or any other integer type

assert_eq!(x.pow(4), Wrapping(16));

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

// 5 ^ 4 = 625, which is too big for a u8
let x: Wrapping<u8> = Wrapping(5);

assert_eq!(x.pow(4).0, 113);

impl Wrapping<i64>

pub fn count_ones(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i8> = Wrapping(-0b1000_0000);

assert_eq!(n.count_ones(), 1);

pub fn count_zeros(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i8> = Wrapping(-0b1000_0000);

assert_eq!(n.count_zeros(), 7);

pub fn leading_zeros(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(-1);

assert_eq!(n.leading_zeros(), 0);

pub fn trailing_zeros(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i8> = Wrapping(-4);

assert_eq!(n.trailing_zeros(), 2);

pub fn rotate_left(self, n: u32) -> Wrapping<i64>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn't the same operation as >>!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

pub fn rotate_right(self, n: u32) -> Wrapping<i64>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn't the same operation as <<!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

pub fn swap_bytes(self) -> Wrapping<i64>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));

pub fn from_be(x: Wrapping<i64>) -> Wrapping<i64>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from big endian to the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "big") {
    assert_eq!(Wrapping::<i64>::from_be(n), n);
} else {
    assert_eq!(Wrapping::<i64>::from_be(n), n.swap_bytes());
}

pub fn from_le(x: Wrapping<i64>) -> Wrapping<i64>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from little endian to the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "little") {
    assert_eq!(Wrapping::<i64>::from_le(n), n);
} else {
    assert_eq!(Wrapping::<i64>::from_le(n), n.swap_bytes());
}

pub fn to_be(self) -> Wrapping<i64>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to big endian from the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n);
} else {
    assert_eq!(n.to_be(), n.swap_bytes());
}

pub fn to_le(self) -> Wrapping<i64>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to little endian from the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n);
} else {
    assert_eq!(n.to_le(), n.swap_bytes());
}

pub fn pow(self, exp: u32) -> Wrapping<i64>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let x: Wrapping<i32> = Wrapping(2); // or any other integer type

assert_eq!(x.pow(4), Wrapping(16));

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

// 5 ^ 4 = 625, which is too big for a u8
let x: Wrapping<u8> = Wrapping(5);

assert_eq!(x.pow(4).0, 113);

impl Wrapping<i128>

pub fn count_ones(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of ones in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i8> = Wrapping(-0b1000_0000);

assert_eq!(n.count_ones(), 1);

pub fn count_zeros(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i8> = Wrapping(-0b1000_0000);

assert_eq!(n.count_zeros(), 7);

pub fn leading_zeros(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of leading zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(-1);

assert_eq!(n.leading_zeros(), 0);

pub fn trailing_zeros(self) -> u32

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Returns the number of trailing zeros in the binary representation of self.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i8> = Wrapping(-4);

assert_eq!(n.trailing_zeros(), 2);

pub fn rotate_left(self, n: u32) -> Wrapping<i128>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the left by a specified amount, n, wrapping the truncated bits to the end of the resulting integer.

Please note this isn't the same operation as >>!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0x76543210FEDCBA99);

assert_eq!(n.rotate_left(32), m);

pub fn rotate_right(self, n: u32) -> Wrapping<i128>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Shifts the bits to the right by a specified amount, n, wrapping the truncated bits to the beginning of the resulting integer.

Please note this isn't the same operation as <<!

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);
let m: Wrapping<i64> = Wrapping(-0xFEDCBA987654322);

assert_eq!(n.rotate_right(4), m);

pub fn swap_bytes(self) -> Wrapping<i128>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Reverses the byte order of the integer.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i16> = Wrapping(0b0000000_01010101);
assert_eq!(n, Wrapping(85));

let m = n.swap_bytes();

assert_eq!(m, Wrapping(0b01010101_00000000));
assert_eq!(m, Wrapping(21760));

pub fn from_be(x: Wrapping<i128>) -> Wrapping<i128>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from big endian to the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "big") {
    assert_eq!(Wrapping::<i64>::from_be(n), n);
} else {
    assert_eq!(Wrapping::<i64>::from_be(n), n.swap_bytes());
}

pub fn from_le(x: Wrapping<i128>) -> Wrapping<i128>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts an integer from little endian to the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "little") {
    assert_eq!(Wrapping::<i64>::from_le(n), n);
} else {
    assert_eq!(Wrapping::<i64>::from_le(n), n.swap_bytes());
}

pub fn to_be(self) -> Wrapping<i128>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to big endian from the target's endianness.

On big endian this is a no-op. On little endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "big") {
    assert_eq!(n.to_be(), n);
} else {
    assert_eq!(n.to_be(), n.swap_bytes());
}

pub fn to_le(self) -> Wrapping<i128>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Converts self to little endian from the target's endianness.

On little endian this is a no-op. On big endian the bytes are swapped.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let n: Wrapping<i64> = Wrapping(0x0123456789ABCDEF);

if cfg!(target_endian = "little") {
    assert_eq!(n.to_le(), n);
} else {
    assert_eq!(n.to_le(), n.swap_bytes());
}

pub fn pow(self, exp: u32) -> Wrapping<i128>

🔬 This is a nightly-only experimental API. (wrapping_int_impl #32463)

Raises self to the power of exp, using exponentiation by squaring.

Examples

Basic usage:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

let x: Wrapping<i32> = Wrapping(2); // or any other integer type

assert_eq!(x.pow(4), Wrapping(16));

Results that are too large are wrapped:

#![feature(wrapping_int_impl)]
use std::num::Wrapping;

// 5 ^ 4 = 625, which is too big for a u8
let x: Wrapping<u8> = Wrapping(5);

assert_eq!(x.pow(4).0, 113);

Trait Implementations

impl<'a> Add<&'a Wrapping<isize>> for Wrapping<isize>

type Output = <Wrapping<isize> as Add<Wrapping<isize>>>::Output

The resulting type after applying the + operator.

fn add(     self,     other: &'a Wrapping<isize> ) -> <Wrapping<isize> as Add<Wrapping<isize>>>::Output

Performs the + operation.

impl<'a, 'b> Add<&'a Wrapping<u32>> for &'b Wrapping<u32>

type Output = <Wrapping<u32> as Add<Wrapping<u32>>>::Output

The resulting type after applying the + operator.

fn add(     self,     other: &'a Wrapping<u32> ) -> <Wrapping<u32> as Add<Wrapping<u32>>>::Output

Performs the + operation.

impl<'a> Add<&'a Wrapping<i32>> for Wrapping<i32>

type Output = <Wrapping<i32> as Add<Wrapping<i32>>>::Output

The resulting type after applying the + operator.

fn add(     self,     other: &'a Wrapping<i32> ) -> <Wrapping<i32> as Add<Wrapping<i32>>>::Output

Performs the + operation.

impl<'a> Add<&'a Wrapping<i128>> for Wrapping<i128>

type Output = <Wrapping<i128> as Add<Wrapping<i128>>>::Output

The resulting type after applying the + operator.

fn add(     self,     other: &'a Wrapping<i128> ) -> <Wrapping<i128> as Add<Wrapping<i128>>>::Output

Performs the + operation.

impl<'a> Add<&'a Wrapping<u16>> for Wrapping<u16>

type Output = <Wrapping<u16> as Add<Wrapping<u16>>>::Output

The resulting type after applying the + operator.

fn add(     self,     other: &'a Wrapping<u16> ) -> <Wrapping<u16> as Add<Wrapping<u16>>>::Output

Performs the + operation.

impl<'a> Add<Wrapping<u64>> for &'a Wrapping<u64>

type Output = <Wrapping<u64> as Add<Wrapping<u64>>>::Output

The resulting type after applying the + operator.

fn add(     self,     other: Wrapping<u64> ) -> <Wrapping<u64> as Add<Wrapping<u64>>>::Output

Performs the + operation.

impl<'a, 'b> Add<&'a Wrapping<i8>> for &'b Wrapping<i8>

type Output = <Wrapping<i8> as Add<Wrapping<i8>>>::Output

The resulting type after applying the + operator.

fn add(     self,     other: &'a Wrapping<i8> ) -> <Wrapping<i8> as Add<Wrapping<i8>>>::Output

Performs the + operation.

impl<'a, 'b> Add<&'a Wrapping<usize>> for &'b Wrapping<usize>

type Output = <Wrapping<usize> as Add<Wrapping<usize>>>::Output

The resulting type after applying the + operator.

fn add(     self,     other: &'a Wrapping<usize> ) -> <Wrapping<usize> as Add<Wrapping<usize>>>::Output

Performs the + operation.

impl<'a> Add<Wrapping<i8>> for &'a Wrapping<i8>

type Output = <Wrapping<i8> as Add<Wrapping<i8>>>::Output

The resulting type after applying the + operator.

fn add(self, other: Wrapping<i8>) -> <Wrapping<i8> as Add<Wrapping<i8>>>::Output

Performs the + operation.

impl<'a> Add<Wrapping<i128>> for &'a Wrapping<i128>

type Output = <Wrapping<i128> as Add<Wrapping<i128>>>::Output

The resulting type after applying the + operator.

fn add(     self,     other: Wrapping<i128> ) -> <Wrapping<i128> as Add<Wrapping<i128>>>::Output

Performs the + operation.

impl<'a> Add<Wrapping<usize>> for &'a Wrapping<usize>

type Output = <Wrapping<usize> as Add<Wrapping<usize>>>::Output

The resulting type after applying the + operator.

fn add(     self,     other: Wrapping<usize> ) -> <Wrapping<usize> as Add<Wrapping<usize>>>::Output

Performs the + operation.

impl<'a, 'b> Add<&'a Wrapping<u64>> for &'b Wrapping<u64>

type Output = <Wrapping<u64> as Add<Wrapping<u64>>>::Output

The resulting type after applying the + operator.

fn add(     self,     other: &'a Wrapping<u64> ) -> <Wrapping<u64> as Add<Wrapping<u64>>>::Output

Performs the + operation.

impl Add<Wrapping<usize>> for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the + operator.

fn add(self, other: Wrapping<usize>) -> Wrapping<usize>

Performs the + operation.

impl<'a> Add<&'a Wrapping<i8>> for Wrapping<i8>

type Output = <Wrapping<i8> as Add<Wrapping<i8>>>::Output

The resulting type after applying the + operator.

fn add(     self,     other: &'a Wrapping<i8> ) -> <Wrapping<i8> as Add<Wrapping<i8>>>::Output

Performs the + operation.

impl<'a, 'b> Add<&'a Wrapping<u16>> for &'b Wrapping<u16>

type Output = <Wrapping<u16> as Add<Wrapping<u16>>>::Output

The resulting type after applying the + operator.

fn add(     self,     other: &'a Wrapping<u16> ) -> <Wrapping<u16> as Add<Wrapping<u16>>>::Output

Performs the + operation.

impl<'a> Add<Wrapping<i32>> for &'a Wrapping<i32>

type Output = <Wrapping<i32> as Add<Wrapping<i32>>>::Output

The resulting type after applying the + operator.

fn add(     self,     other: Wrapping<i32> ) -> <Wrapping<i32> as Add<Wrapping<i32>>>::Output

Performs the + operation.

impl<'a> Add<&'a Wrapping<u8>> for Wrapping<u8>

type Output = <Wrapping<u8> as Add<Wrapping<u8>>>::Output

The resulting type after applying the + operator.

fn add(     self,     other: &'a Wrapping<u8> ) -> <Wrapping<u8> as Add<Wrapping<u8>>>::Output

Performs the + operation.

impl<'a> Add<&'a Wrapping<u32>> for Wrapping<u32>

type Output = <Wrapping<u32> as Add<Wrapping<u32>>>::Output

The resulting type after applying the + operator.

fn add(     self,     other: &'a Wrapping<u32> ) -> <Wrapping<u32> as Add<Wrapping<u32>>>::Output

Performs the + operation.

impl Add<Wrapping<isize>> for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the + operator.

fn add(self, other: Wrapping<isize>) -> Wrapping<isize>

Performs the + operation.

impl<'a, 'b> Add<&'a Wrapping<u8>> for &'b Wrapping<u8>

type Output = <Wrapping<u8> as Add<Wrapping<u8>>>::Output

The resulting type after applying the + operator.

fn add(     self,     other: &'a Wrapping<u8> ) -> <Wrapping<u8> as Add<Wrapping<u8>>>::Output

Performs the + operation.

impl<'a, 'b> Add<&'a Wrapping<u128>> for &'b Wrapping<u128>

type Output = <Wrapping<u128> as Add<Wrapping<u128>>>::Output

The resulting type after applying the + operator.

fn add(     self,     other: &'a Wrapping<u128> ) -> <Wrapping<u128> as Add<Wrapping<u128>>>::Output

Performs the + operation.

impl<'a> Add<&'a Wrapping<i64>> for Wrapping<i64>

type Output = <Wrapping<i64> as Add<Wrapping<i64>>>::Output

The resulting type after applying the + operator.

fn add(     self,     other: &'a Wrapping<i64> ) -> <Wrapping<i64> as Add<Wrapping<i64>>>::Output

Performs the + operation.

impl Add<Wrapping<u16>> for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the + operator.

fn add(self, other: Wrapping<u16>) -> Wrapping<u16>

Performs the + operation.

impl Add<Wrapping<u32>> for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the + operator.

fn add(self, other: Wrapping<u32>) -> Wrapping<u32>

Performs the + operation.

impl Add<Wrapping<i128>> for Wrapping<i128>

type Output = Wrapping<i128>

The resulting type after applying the + operator.

fn add(self, other: Wrapping<i128>) -> Wrapping<i128>

Performs the + operation.

impl<'a> Add<Wrapping<i16>> for &'a Wrapping<i16>

type Output = <Wrapping<i16> as Add<Wrapping<i16>>>::Output

The resulting type after applying the + operator.

fn add(     self,     other: Wrapping<i16> ) -> <Wrapping<i16> as Add<Wrapping<i16>>>::Output

Performs the + operation.

impl<'a> Add<Wrapping<u32>> for &'a Wrapping<u32>

type Output = <Wrapping<u32> as Add<Wrapping<u32>>>::Output

The resulting type after applying the + operator.

fn add(     self,     other: Wrapping<u32> ) -> <Wrapping<u32> as Add<Wrapping<u32>>>::Output

Performs the + operation.

impl<'a, 'b> Add<&'a Wrapping<i128>> for &'b Wrapping<i128>

type Output = <Wrapping<i128> as Add<Wrapping<i128>>>::Output

The resulting type after applying the + operator.

fn add(     self,     other: &'a Wrapping<i128> ) -> <Wrapping<i128> as Add<Wrapping<i128>>>::Output

Performs the + operation.

impl<'a> Add<Wrapping<i64>> for &'a Wrapping<i64>

type Output = <Wrapping<i64> as Add<Wrapping<i64>>>::Output

The resulting type after applying the + operator.

fn add(     self,     other: Wrapping<i64> ) -> <Wrapping<i64> as Add<Wrapping<i64>>>::Output

Performs the + operation.

impl<'a> Add<&'a Wrapping<u128>> for Wrapping<u128>

type Output = <Wrapping<u128> as Add<Wrapping<u128>>>::Output

The resulting type after applying the + operator.

fn add(     self,     other: &'a Wrapping<u128> ) -> <Wrapping<u128> as Add<Wrapping<u128>>>::Output

Performs the + operation.

impl<'a> Add<&'a Wrapping<u64>> for Wrapping<u64>

type Output = <Wrapping<u64> as Add<Wrapping<u64>>>::Output

The resulting type after applying the + operator.

fn add(     self,     other: &'a Wrapping<u64> ) -> <Wrapping<u64> as Add<Wrapping<u64>>>::Output

Performs the + operation.

impl<'a> Add<&'a Wrapping<i16>> for Wrapping<i16>

type Output = <Wrapping<i16> as Add<Wrapping<i16>>>::Output

The resulting type after applying the + operator.

fn add(     self,     other: &'a Wrapping<i16> ) -> <Wrapping<i16> as Add<Wrapping<i16>>>::Output

Performs the + operation.

impl Add<Wrapping<u8>> for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the + operator.

fn add(self, other: Wrapping<u8>) -> Wrapping<u8>

Performs the + operation.

impl<'a, 'b> Add<&'a Wrapping<i32>> for &'b Wrapping<i32>

type Output = <Wrapping<i32> as Add<Wrapping<i32>>>::Output

The resulting type after applying the + operator.

fn add(     self,     other: &'a Wrapping<i32> ) -> <Wrapping<i32> as Add<Wrapping<i32>>>::Output

Performs the + operation.

impl<'a, 'b> Add<&'a Wrapping<i64>> for &'b Wrapping<i64>

type Output = <Wrapping<i64> as Add<Wrapping<i64>>>::Output

The resulting type after applying the + operator.

fn add(     self,     other: &'a Wrapping<i64> ) -> <Wrapping<i64> as Add<Wrapping<i64>>>::Output

Performs the + operation.

impl<'a> Add<Wrapping<isize>> for &'a Wrapping<isize>

type Output = <Wrapping<isize> as Add<Wrapping<isize>>>::Output

The resulting type after applying the + operator.

fn add(     self,     other: Wrapping<isize> ) -> <Wrapping<isize> as Add<Wrapping<isize>>>::Output

Performs the + operation.

impl<'a, 'b> Add<&'a Wrapping<i16>> for &'b Wrapping<i16>

type Output = <Wrapping<i16> as Add<Wrapping<i16>>>::Output

The resulting type after applying the + operator.

fn add(     self,     other: &'a Wrapping<i16> ) -> <Wrapping<i16> as Add<Wrapping<i16>>>::Output

Performs the + operation.

impl Add<Wrapping<i32>> for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the + operator.

fn add(self, other: Wrapping<i32>) -> Wrapping<i32>

Performs the + operation.

impl<'a, 'b> Add<&'a Wrapping<isize>> for &'b Wrapping<isize>

type Output = <Wrapping<isize> as Add<Wrapping<isize>>>::Output

The resulting type after applying the + operator.

fn add(     self,     other: &'a Wrapping<isize> ) -> <Wrapping<isize> as Add<Wrapping<isize>>>::Output

Performs the + operation.

impl<'a> Add<Wrapping<u128>> for &'a Wrapping<u128>

type Output = <Wrapping<u128> as Add<Wrapping<u128>>>::Output

The resulting type after applying the + operator.

fn add(     self,     other: Wrapping<u128> ) -> <Wrapping<u128> as Add<Wrapping<u128>>>::Output

Performs the + operation.

impl Add<Wrapping<i8>> for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the + operator.

fn add(self, other: Wrapping<i8>) -> Wrapping<i8>

Performs the + operation.

impl Add<Wrapping<u128>> for Wrapping<u128>

type Output = Wrapping<u128>

The resulting type after applying the + operator.

fn add(self, other: Wrapping<u128>) -> Wrapping<u128>

Performs the + operation.

impl Add<Wrapping<u64>> for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the + operator.

fn add(self, other: Wrapping<u64>) -> Wrapping<u64>

Performs the + operation.

impl<'a> Add<&'a Wrapping<usize>> for Wrapping<usize>

type Output = <Wrapping<usize> as Add<Wrapping<usize>>>::Output

The resulting type after applying the + operator.

fn add(     self,     other: &'a Wrapping<usize> ) -> <Wrapping<usize> as Add<Wrapping<usize>>>::Output

Performs the + operation.

impl Add<Wrapping<i64>> for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the + operator.

fn add(self, other: Wrapping<i64>) -> Wrapping<i64>

Performs the + operation.

impl Add<Wrapping<i16>> for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the + operator.

fn add(self, other: Wrapping<i16>) -> Wrapping<i16>

Performs the + operation.

impl<'a> Add<Wrapping<u16>> for &'a Wrapping<u16>

type Output = <Wrapping<u16> as Add<Wrapping<u16>>>::Output

The resulting type after applying the + operator.

fn add(     self,     other: Wrapping<u16> ) -> <Wrapping<u16> as Add<Wrapping<u16>>>::Output

Performs the + operation.

impl<'a> Add<Wrapping<u8>> for &'a Wrapping<u8>

type Output = <Wrapping<u8> as Add<Wrapping<u8>>>::Output

The resulting type after applying the + operator.

fn add(self, other: Wrapping<u8>) -> <Wrapping<u8> as Add<Wrapping<u8>>>::Output

Performs the + operation.

impl<'a> BitOr<&'a Wrapping<i16>> for Wrapping<i16>

type Output = <Wrapping<i16> as BitOr<Wrapping<i16>>>::Output

The resulting type after applying the | operator.

fn bitor(     self,     other: &'a Wrapping<i16> ) -> <Wrapping<i16> as BitOr<Wrapping<i16>>>::Output

Performs the | operation.

impl<'a> BitOr<Wrapping<u128>> for &'a Wrapping<u128>

type Output = <Wrapping<u128> as BitOr<Wrapping<u128>>>::Output

The resulting type after applying the | operator.

fn bitor(     self,     other: Wrapping<u128> ) -> <Wrapping<u128> as BitOr<Wrapping<u128>>>::Output

Performs the | operation.

impl<'a> BitOr<Wrapping<u64>> for &'a Wrapping<u64>

type Output = <Wrapping<u64> as BitOr<Wrapping<u64>>>::Output

The resulting type after applying the | operator.

fn bitor(     self,     other: Wrapping<u64> ) -> <Wrapping<u64> as BitOr<Wrapping<u64>>>::Output

Performs the | operation.

impl<'a, 'b> BitOr<&'a Wrapping<isize>> for &'b Wrapping<isize>

type Output = <Wrapping<isize> as BitOr<Wrapping<isize>>>::Output

The resulting type after applying the | operator.

fn bitor(     self,     other: &'a Wrapping<isize> ) -> <Wrapping<isize> as BitOr<Wrapping<isize>>>::Output

Performs the | operation.

impl<'a, 'b> BitOr<&'a Wrapping<u128>> for &'b Wrapping<u128>

type Output = <Wrapping<u128> as BitOr<Wrapping<u128>>>::Output

The resulting type after applying the | operator.

fn bitor(     self,     other: &'a Wrapping<u128> ) -> <Wrapping<u128> as BitOr<Wrapping<u128>>>::Output

Performs the | operation.

impl<'a> BitOr<Wrapping<usize>> for &'a Wrapping<usize>

type Output = <Wrapping<usize> as BitOr<Wrapping<usize>>>::Output

The resulting type after applying the | operator.

fn bitor(     self,     other: Wrapping<usize> ) -> <Wrapping<usize> as BitOr<Wrapping<usize>>>::Output

Performs the | operation.

impl BitOr<Wrapping<usize>> for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<usize>) -> Wrapping<usize>

Performs the | operation.

impl<'a> BitOr<&'a Wrapping<u128>> for Wrapping<u128>

type Output = <Wrapping<u128> as BitOr<Wrapping<u128>>>::Output

The resulting type after applying the | operator.

fn bitor(     self,     other: &'a Wrapping<u128> ) -> <Wrapping<u128> as BitOr<Wrapping<u128>>>::Output

Performs the | operation.

impl BitOr<Wrapping<i64>> for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<i64>) -> Wrapping<i64>

Performs the | operation.

impl<'a, 'b> BitOr<&'a Wrapping<i32>> for &'b Wrapping<i32>

type Output = <Wrapping<i32> as BitOr<Wrapping<i32>>>::Output

The resulting type after applying the | operator.

fn bitor(     self,     other: &'a Wrapping<i32> ) -> <Wrapping<i32> as BitOr<Wrapping<i32>>>::Output

Performs the | operation.

impl BitOr<Wrapping<u128>> for Wrapping<u128>

type Output = Wrapping<u128>

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<u128>) -> Wrapping<u128>

Performs the | operation.

impl<'a> BitOr<&'a Wrapping<usize>> for Wrapping<usize>

type Output = <Wrapping<usize> as BitOr<Wrapping<usize>>>::Output

The resulting type after applying the | operator.

fn bitor(     self,     other: &'a Wrapping<usize> ) -> <Wrapping<usize> as BitOr<Wrapping<usize>>>::Output

Performs the | operation.

impl<'a, 'b> BitOr<&'a Wrapping<u64>> for &'b Wrapping<u64>

type Output = <Wrapping<u64> as BitOr<Wrapping<u64>>>::Output

The resulting type after applying the | operator.

fn bitor(     self,     other: &'a Wrapping<u64> ) -> <Wrapping<u64> as BitOr<Wrapping<u64>>>::Output

Performs the | operation.

impl<'a, 'b> BitOr<&'a Wrapping<u8>> for &'b Wrapping<u8>

type Output = <Wrapping<u8> as BitOr<Wrapping<u8>>>::Output

The resulting type after applying the | operator.

fn bitor(     self,     other: &'a Wrapping<u8> ) -> <Wrapping<u8> as BitOr<Wrapping<u8>>>::Output

Performs the | operation.

impl<'a> BitOr<Wrapping<i64>> for &'a Wrapping<i64>

type Output = <Wrapping<i64> as BitOr<Wrapping<i64>>>::Output

The resulting type after applying the | operator.

fn bitor(     self,     other: Wrapping<i64> ) -> <Wrapping<i64> as BitOr<Wrapping<i64>>>::Output

Performs the | operation.

impl<'a> BitOr<Wrapping<i128>> for &'a Wrapping<i128>

type Output = <Wrapping<i128> as BitOr<Wrapping<i128>>>::Output

The resulting type after applying the | operator.

fn bitor(     self,     other: Wrapping<i128> ) -> <Wrapping<i128> as BitOr<Wrapping<i128>>>::Output

Performs the | operation.

impl<'a, 'b> BitOr<&'a Wrapping<u32>> for &'b Wrapping<u32>

type Output = <Wrapping<u32> as BitOr<Wrapping<u32>>>::Output

The resulting type after applying the | operator.

fn bitor(     self,     other: &'a Wrapping<u32> ) -> <Wrapping<u32> as BitOr<Wrapping<u32>>>::Output

Performs the | operation.

impl BitOr<Wrapping<i16>> for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<i16>) -> Wrapping<i16>

Performs the | operation.

impl<'a, 'b> BitOr<&'a Wrapping<u16>> for &'b Wrapping<u16>

type Output = <Wrapping<u16> as BitOr<Wrapping<u16>>>::Output

The resulting type after applying the | operator.

fn bitor(     self,     other: &'a Wrapping<u16> ) -> <Wrapping<u16> as BitOr<Wrapping<u16>>>::Output

Performs the | operation.

impl<'a> BitOr<&'a Wrapping<isize>> for Wrapping<isize>

type Output = <Wrapping<isize> as BitOr<Wrapping<isize>>>::Output

The resulting type after applying the | operator.

fn bitor(     self,     other: &'a Wrapping<isize> ) -> <Wrapping<isize> as BitOr<Wrapping<isize>>>::Output

Performs the | operation.

impl BitOr<Wrapping<i32>> for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<i32>) -> Wrapping<i32>

Performs the | operation.

impl<'a> BitOr<&'a Wrapping<i128>> for Wrapping<i128>

type Output = <Wrapping<i128> as BitOr<Wrapping<i128>>>::Output

The resulting type after applying the | operator.

fn bitor(     self,     other: &'a Wrapping<i128> ) -> <Wrapping<i128> as BitOr<Wrapping<i128>>>::Output

Performs the | operation.

impl<'a, 'b> BitOr<&'a Wrapping<i8>> for &'b Wrapping<i8>

type Output = <Wrapping<i8> as BitOr<Wrapping<i8>>>::Output

The resulting type after applying the | operator.

fn bitor(     self,     other: &'a Wrapping<i8> ) -> <Wrapping<i8> as BitOr<Wrapping<i8>>>::Output

Performs the | operation.

impl<'a, 'b> BitOr<&'a Wrapping<i64>> for &'b Wrapping<i64>

type Output = <Wrapping<i64> as BitOr<Wrapping<i64>>>::Output

The resulting type after applying the | operator.

fn bitor(     self,     other: &'a Wrapping<i64> ) -> <Wrapping<i64> as BitOr<Wrapping<i64>>>::Output

Performs the | operation.

impl BitOr<Wrapping<u16>> for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<u16>) -> Wrapping<u16>

Performs the | operation.

impl<'a> BitOr<&'a Wrapping<u8>> for Wrapping<u8>

type Output = <Wrapping<u8> as BitOr<Wrapping<u8>>>::Output

The resulting type after applying the | operator.

fn bitor(     self,     other: &'a Wrapping<u8> ) -> <Wrapping<u8> as BitOr<Wrapping<u8>>>::Output

Performs the | operation.

impl<'a> BitOr<&'a Wrapping<u32>> for Wrapping<u32>

type Output = <Wrapping<u32> as BitOr<Wrapping<u32>>>::Output

The resulting type after applying the | operator.

fn bitor(     self,     other: &'a Wrapping<u32> ) -> <Wrapping<u32> as BitOr<Wrapping<u32>>>::Output

Performs the | operation.

impl BitOr<Wrapping<u32>> for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<u32>) -> Wrapping<u32>

Performs the | operation.

impl BitOr<Wrapping<i128>> for Wrapping<i128>

type Output = Wrapping<i128>

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<i128>) -> Wrapping<i128>

Performs the | operation.

impl<'a> BitOr<&'a Wrapping<u64>> for Wrapping<u64>

type Output = <Wrapping<u64> as BitOr<Wrapping<u64>>>::Output

The resulting type after applying the | operator.

fn bitor(     self,     other: &'a Wrapping<u64> ) -> <Wrapping<u64> as BitOr<Wrapping<u64>>>::Output

Performs the | operation.

impl<'a> BitOr<Wrapping<i32>> for &'a Wrapping<i32>

type Output = <Wrapping<i32> as BitOr<Wrapping<i32>>>::Output

The resulting type after applying the | operator.

fn bitor(     self,     other: Wrapping<i32> ) -> <Wrapping<i32> as BitOr<Wrapping<i32>>>::Output

Performs the | operation.

impl<'a> BitOr<Wrapping<i8>> for &'a Wrapping<i8>

type Output = <Wrapping<i8> as BitOr<Wrapping<i8>>>::Output

The resulting type after applying the | operator.

fn bitor(     self,     other: Wrapping<i8> ) -> <Wrapping<i8> as BitOr<Wrapping<i8>>>::Output

Performs the | operation.

impl BitOr<Wrapping<u64>> for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<u64>) -> Wrapping<u64>

Performs the | operation.

impl<'a> BitOr<&'a Wrapping<i64>> for Wrapping<i64>

type Output = <Wrapping<i64> as BitOr<Wrapping<i64>>>::Output

The resulting type after applying the | operator.

fn bitor(     self,     other: &'a Wrapping<i64> ) -> <Wrapping<i64> as BitOr<Wrapping<i64>>>::Output

Performs the | operation.

impl<'a, 'b> BitOr<&'a Wrapping<i128>> for &'b Wrapping<i128>

type Output = <Wrapping<i128> as BitOr<Wrapping<i128>>>::Output

The resulting type after applying the | operator.

fn bitor(     self,     other: &'a Wrapping<i128> ) -> <Wrapping<i128> as BitOr<Wrapping<i128>>>::Output

Performs the | operation.

impl BitOr<Wrapping<i8>> for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<i8>) -> Wrapping<i8>

Performs the | operation.

impl<'a> BitOr<Wrapping<u16>> for &'a Wrapping<u16>

type Output = <Wrapping<u16> as BitOr<Wrapping<u16>>>::Output

The resulting type after applying the | operator.

fn bitor(     self,     other: Wrapping<u16> ) -> <Wrapping<u16> as BitOr<Wrapping<u16>>>::Output

Performs the | operation.

impl<'a> BitOr<Wrapping<u8>> for &'a Wrapping<u8>

type Output = <Wrapping<u8> as BitOr<Wrapping<u8>>>::Output

The resulting type after applying the | operator.

fn bitor(     self,     other: Wrapping<u8> ) -> <Wrapping<u8> as BitOr<Wrapping<u8>>>::Output

Performs the | operation.

impl<'a, 'b> BitOr<&'a Wrapping<usize>> for &'b Wrapping<usize>

type Output = <Wrapping<usize> as BitOr<Wrapping<usize>>>::Output

The resulting type after applying the | operator.

fn bitor(     self,     other: &'a Wrapping<usize> ) -> <Wrapping<usize> as BitOr<Wrapping<usize>>>::Output

Performs the | operation.

impl BitOr<Wrapping<u8>> for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<u8>) -> Wrapping<u8>

Performs the | operation.

impl<'a> BitOr<&'a Wrapping<i8>> for Wrapping<i8>

type Output = <Wrapping<i8> as BitOr<Wrapping<i8>>>::Output

The resulting type after applying the | operator.

fn bitor(     self,     other: &'a Wrapping<i8> ) -> <Wrapping<i8> as BitOr<Wrapping<i8>>>::Output

Performs the | operation.

impl<'a> BitOr<Wrapping<isize>> for &'a Wrapping<isize>

type Output = <Wrapping<isize> as BitOr<Wrapping<isize>>>::Output

The resulting type after applying the | operator.

fn bitor(     self,     other: Wrapping<isize> ) -> <Wrapping<isize> as BitOr<Wrapping<isize>>>::Output

Performs the | operation.

impl<'a> BitOr<Wrapping<u32>> for &'a Wrapping<u32>

type Output = <Wrapping<u32> as BitOr<Wrapping<u32>>>::Output

The resulting type after applying the | operator.

fn bitor(     self,     other: Wrapping<u32> ) -> <Wrapping<u32> as BitOr<Wrapping<u32>>>::Output

Performs the | operation.

impl<'a, 'b> BitOr<&'a Wrapping<i16>> for &'b Wrapping<i16>

type Output = <Wrapping<i16> as BitOr<Wrapping<i16>>>::Output

The resulting type after applying the | operator.

fn bitor(     self,     other: &'a Wrapping<i16> ) -> <Wrapping<i16> as BitOr<Wrapping<i16>>>::Output

Performs the | operation.

impl BitOr<Wrapping<isize>> for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the | operator.

fn bitor(self, other: Wrapping<isize>) -> Wrapping<isize>

Performs the | operation.

impl<'a> BitOr<Wrapping<i16>> for &'a Wrapping<i16>

type Output = <Wrapping<i16> as BitOr<Wrapping<i16>>>::Output

The resulting type after applying the | operator.

fn bitor(     self,     other: Wrapping<i16> ) -> <Wrapping<i16> as BitOr<Wrapping<i16>>>::Output

Performs the | operation.

impl<'a> BitOr<&'a Wrapping<i32>> for Wrapping<i32>

type Output = <Wrapping<i32> as BitOr<Wrapping<i32>>>::Output

The resulting type after applying the | operator.

fn bitor(     self,     other: &'a Wrapping<i32> ) -> <Wrapping<i32> as BitOr<Wrapping<i32>>>::Output

Performs the | operation.

impl<'a> BitOr<&'a Wrapping<u16>> for Wrapping<u16>

type Output = <Wrapping<u16> as BitOr<Wrapping<u16>>>::Output

The resulting type after applying the | operator.

fn bitor(     self,     other: &'a Wrapping<u16> ) -> <Wrapping<u16> as BitOr<Wrapping<u16>>>::Output

Performs the | operation.

impl<T> Hash for Wrapping<T> where     T: Hash,

fn hash<__HT>(&self, state: &mut __HT) where     __HT: Hasher,

Feeds this value into the given [Hasher].

fn hash_slice<H>(data: &[Self], state: &mut H) where     H: Hasher,

Feeds a slice of this type into the given [Hasher].

impl<'a> RemAssign<&'a Wrapping<i32>> for Wrapping<i32>

fn rem_assign(&mut self, other: &'a Wrapping<i32>)

Performs the %= operation.

impl RemAssign<Wrapping<i64>> for Wrapping<i64>

fn rem_assign(&mut self, other: Wrapping<i64>)

Performs the %= operation.

impl RemAssign<Wrapping<i32>> for Wrapping<i32>

fn rem_assign(&mut self, other: Wrapping<i32>)

Performs the %= operation.

impl RemAssign<Wrapping<u8>> for Wrapping<u8>

fn rem_assign(&mut self, other: Wrapping<u8>)

Performs the %= operation.

impl RemAssign<Wrapping<usize>> for Wrapping<usize>

fn rem_assign(&mut self, other: Wrapping<usize>)

Performs the %= operation.

impl<'a> RemAssign<&'a Wrapping<u128>> for Wrapping<u128>

fn rem_assign(&mut self, other: &'a Wrapping<u128>)

Performs the %= operation.

impl RemAssign<Wrapping<isize>> for Wrapping<isize>

fn rem_assign(&mut self, other: Wrapping<isize>)

Performs the %= operation.

impl RemAssign<Wrapping<i16>> for Wrapping<i16>

fn rem_assign(&mut self, other: Wrapping<i16>)

Performs the %= operation.

impl<'a> RemAssign<&'a Wrapping<i16>> for Wrapping<i16>

fn rem_assign(&mut self, other: &'a Wrapping<i16>)

Performs the %= operation.

impl<'a> RemAssign<&'a Wrapping<i8>> for Wrapping<i8>

fn rem_assign(&mut self, other: &'a Wrapping<i8>)

Performs the %= operation.

impl<'a> RemAssign<&'a Wrapping<u8>> for Wrapping<u8>

fn rem_assign(&mut self, other: &'a Wrapping<u8>)

Performs the %= operation.

impl<'a> RemAssign<&'a Wrapping<u16>> for Wrapping<u16>

fn rem_assign(&mut self, other: &'a Wrapping<u16>)

Performs the %= operation.

impl<'a> RemAssign<&'a Wrapping<i128>> for Wrapping<i128>

fn rem_assign(&mut self, other: &'a Wrapping<i128>)

Performs the %= operation.

impl<'a> RemAssign<&'a Wrapping<u32>> for Wrapping<u32>

fn rem_assign(&mut self, other: &'a Wrapping<u32>)

Performs the %= operation.

impl RemAssign<Wrapping<i8>> for Wrapping<i8>

fn rem_assign(&mut self, other: Wrapping<i8>)

Performs the %= operation.

impl RemAssign<Wrapping<u32>> for Wrapping<u32>

fn rem_assign(&mut self, other: Wrapping<u32>)

Performs the %= operation.

impl RemAssign<Wrapping<u16>> for Wrapping<u16>

fn rem_assign(&mut self, other: Wrapping<u16>)

Performs the %= operation.

impl RemAssign<Wrapping<u64>> for Wrapping<u64>

fn rem_assign(&mut self, other: Wrapping<u64>)

Performs the %= operation.

impl<'a> RemAssign<&'a Wrapping<usize>> for Wrapping<usize>

fn rem_assign(&mut self, other: &'a Wrapping<usize>)

Performs the %= operation.

impl RemAssign<Wrapping<u128>> for Wrapping<u128>

fn rem_assign(&mut self, other: Wrapping<u128>)

Performs the %= operation.

impl RemAssign<Wrapping<i128>> for Wrapping<i128>

fn rem_assign(&mut self, other: Wrapping<i128>)

Performs the %= operation.

impl<'a> RemAssign<&'a Wrapping<isize>> for Wrapping<isize>

fn rem_assign(&mut self, other: &'a Wrapping<isize>)

Performs the %= operation.

impl<'a> RemAssign<&'a Wrapping<i64>> for Wrapping<i64>

fn rem_assign(&mut self, other: &'a Wrapping<i64>)

Performs the %= operation.

impl<'a> RemAssign<&'a Wrapping<u64>> for Wrapping<u64>

fn rem_assign(&mut self, other: &'a Wrapping<u64>)

Performs the %= operation.

impl<'a> DivAssign<&'a Wrapping<u32>> for Wrapping<u32>

fn div_assign(&mut self, other: &'a Wrapping<u32>)

Performs the /= operation.

impl<'a> DivAssign<&'a Wrapping<u128>> for Wrapping<u128>

fn div_assign(&mut self, other: &'a Wrapping<u128>)

Performs the /= operation.

impl DivAssign<Wrapping<i16>> for Wrapping<i16>

fn div_assign(&mut self, other: Wrapping<i16>)

Performs the /= operation.

impl<'a> DivAssign<&'a Wrapping<i64>> for Wrapping<i64>

fn div_assign(&mut self, other: &'a Wrapping<i64>)

Performs the /= operation.

impl DivAssign<Wrapping<i8>> for Wrapping<i8>

fn div_assign(&mut self, other: Wrapping<i8>)

Performs the /= operation.

impl DivAssign<Wrapping<usize>> for Wrapping<usize>

fn div_assign(&mut self, other: Wrapping<usize>)

Performs the /= operation.

impl DivAssign<Wrapping<i64>> for Wrapping<i64>

fn div_assign(&mut self, other: Wrapping<i64>)

Performs the /= operation.

impl DivAssign<Wrapping<isize>> for Wrapping<isize>

fn div_assign(&mut self, other: Wrapping<isize>)

Performs the /= operation.

impl<'a> DivAssign<&'a Wrapping<isize>> for Wrapping<isize>

fn div_assign(&mut self, other: &'a Wrapping<isize>)

Performs the /= operation.

impl DivAssign<Wrapping<u128>> for Wrapping<u128>

fn div_assign(&mut self, other: Wrapping<u128>)

Performs the /= operation.

impl<'a> DivAssign<&'a Wrapping<i128>> for Wrapping<i128>

fn div_assign(&mut self, other: &'a Wrapping<i128>)

Performs the /= operation.

impl DivAssign<Wrapping<i128>> for Wrapping<i128>

fn div_assign(&mut self, other: Wrapping<i128>)

Performs the /= operation.

impl<'a> DivAssign<&'a Wrapping<i8>> for Wrapping<i8>

fn div_assign(&mut self, other: &'a Wrapping<i8>)

Performs the /= operation.

impl<'a> DivAssign<&'a Wrapping<i16>> for Wrapping<i16>

fn div_assign(&mut self, other: &'a Wrapping<i16>)

Performs the /= operation.

impl DivAssign<Wrapping<u16>> for Wrapping<u16>

fn div_assign(&mut self, other: Wrapping<u16>)

Performs the /= operation.

impl<'a> DivAssign<&'a Wrapping<u16>> for Wrapping<u16>

fn div_assign(&mut self, other: &'a Wrapping<u16>)

Performs the /= operation.

impl<'a> DivAssign<&'a Wrapping<i32>> for Wrapping<i32>

fn div_assign(&mut self, other: &'a Wrapping<i32>)

Performs the /= operation.

impl<'a> DivAssign<&'a Wrapping<u64>> for Wrapping<u64>

fn div_assign(&mut self, other: &'a Wrapping<u64>)

Performs the /= operation.

impl DivAssign<Wrapping<u32>> for Wrapping<u32>

fn div_assign(&mut self, other: Wrapping<u32>)

Performs the /= operation.

impl DivAssign<Wrapping<i32>> for Wrapping<i32>

fn div_assign(&mut self, other: Wrapping<i32>)

Performs the /= operation.

impl<'a> DivAssign<&'a Wrapping<u8>> for Wrapping<u8>

fn div_assign(&mut self, other: &'a Wrapping<u8>)

Performs the /= operation.

impl DivAssign<Wrapping<u8>> for Wrapping<u8>

fn div_assign(&mut self, other: Wrapping<u8>)

Performs the /= operation.

impl<'a> DivAssign<&'a Wrapping<usize>> for Wrapping<usize>

fn div_assign(&mut self, other: &'a Wrapping<usize>)

Performs the /= operation.

impl DivAssign<Wrapping<u64>> for Wrapping<u64>

fn div_assign(&mut self, other: Wrapping<u64>)

Performs the /= operation.

impl<'a> MulAssign<&'a Wrapping<usize>> for Wrapping<usize>

fn mul_assign(&mut self, other: &'a Wrapping<usize>)

Performs the *= operation.

impl<'a> MulAssign<&'a Wrapping<isize>> for Wrapping<isize>

fn mul_assign(&mut self, other: &'a Wrapping<isize>)

Performs the *= operation.

impl<'a> MulAssign<&'a Wrapping<u32>> for Wrapping<u32>

fn mul_assign(&mut self, other: &'a Wrapping<u32>)

Performs the *= operation.

impl<'a> MulAssign<&'a Wrapping<i128>> for Wrapping<i128>

fn mul_assign(&mut self, other: &'a Wrapping<i128>)

Performs the *= operation.

impl<'a> MulAssign<&'a Wrapping<i16>> for Wrapping<i16>

fn mul_assign(&mut self, other: &'a Wrapping<i16>)

Performs the *= operation.

impl MulAssign<Wrapping<i32>> for Wrapping<i32>

fn mul_assign(&mut self, other: Wrapping<i32>)

Performs the *= operation.

impl<'a> MulAssign<&'a Wrapping<i32>> for Wrapping<i32>

fn mul_assign(&mut self, other: &'a Wrapping<i32>)

Performs the *= operation.

impl MulAssign<Wrapping<i64>> for Wrapping<i64>

fn mul_assign(&mut self, other: Wrapping<i64>)

Performs the *= operation.

impl MulAssign<Wrapping<isize>> for Wrapping<isize>

fn mul_assign(&mut self, other: Wrapping<isize>)

Performs the *= operation.

impl MulAssign<Wrapping<i128>> for Wrapping<i128>

fn mul_assign(&mut self, other: Wrapping<i128>)

Performs the *= operation.

impl MulAssign<Wrapping<u128>> for Wrapping<u128>

fn mul_assign(&mut self, other: Wrapping<u128>)

Performs the *= operation.

impl<'a> MulAssign<&'a Wrapping<i64>> for Wrapping<i64>

fn mul_assign(&mut self, other: &'a Wrapping<i64>)

Performs the *= operation.

impl MulAssign<Wrapping<u8>> for Wrapping<u8>

fn mul_assign(&mut self, other: Wrapping<u8>)

Performs the *= operation.

impl<'a> MulAssign<&'a Wrapping<i8>> for Wrapping<i8>

fn mul_assign(&mut self, other: &'a Wrapping<i8>)

Performs the *= operation.

impl MulAssign<Wrapping<i16>> for Wrapping<i16>

fn mul_assign(&mut self, other: Wrapping<i16>)

Performs the *= operation.

impl MulAssign<Wrapping<i8>> for Wrapping<i8>

fn mul_assign(&mut self, other: Wrapping<i8>)

Performs the *= operation.

impl MulAssign<Wrapping<u16>> for Wrapping<u16>

fn mul_assign(&mut self, other: Wrapping<u16>)

Performs the *= operation.

impl<'a> MulAssign<&'a Wrapping<u8>> for Wrapping<u8>

fn mul_assign(&mut self, other: &'a Wrapping<u8>)

Performs the *= operation.

impl<'a> MulAssign<&'a Wrapping<u128>> for Wrapping<u128>

fn mul_assign(&mut self, other: &'a Wrapping<u128>)

Performs the *= operation.

impl<'a> MulAssign<&'a Wrapping<u64>> for Wrapping<u64>

fn mul_assign(&mut self, other: &'a Wrapping<u64>)

Performs the *= operation.

impl MulAssign<Wrapping<usize>> for Wrapping<usize>

fn mul_assign(&mut self, other: Wrapping<usize>)

Performs the *= operation.

impl MulAssign<Wrapping<u32>> for Wrapping<u32>

fn mul_assign(&mut self, other: Wrapping<u32>)

Performs the *= operation.

impl MulAssign<Wrapping<u64>> for Wrapping<u64>

fn mul_assign(&mut self, other: Wrapping<u64>)

Performs the *= operation.

impl<'a> MulAssign<&'a Wrapping<u16>> for Wrapping<u16>

fn mul_assign(&mut self, other: &'a Wrapping<u16>)

Performs the *= operation.

impl<'a> SubAssign<&'a Wrapping<i16>> for Wrapping<i16>

fn sub_assign(&mut self, other: &'a Wrapping<i16>)

Performs the -= operation.

impl SubAssign<Wrapping<u128>> for Wrapping<u128>

fn sub_assign(&mut self, other: Wrapping<u128>)

Performs the -= operation.

impl<'a> SubAssign<&'a Wrapping<u128>> for Wrapping<u128>

fn sub_assign(&mut self, other: &'a Wrapping<u128>)

Performs the -= operation.

impl<'a> SubAssign<&'a Wrapping<u64>> for Wrapping<u64>

fn sub_assign(&mut self, other: &'a Wrapping<u64>)

Performs the -= operation.

impl SubAssign<Wrapping<i8>> for Wrapping<i8>

fn sub_assign(&mut self, other: Wrapping<i8>)

Performs the -= operation.

impl SubAssign<Wrapping<i64>> for Wrapping<i64>

fn sub_assign(&mut self, other: Wrapping<i64>)

Performs the -= operation.

impl SubAssign<Wrapping<i32>> for Wrapping<i32>

fn sub_assign(&mut self, other: Wrapping<i32>)

Performs the -= operation.

impl<'a> SubAssign<&'a Wrapping<usize>> for Wrapping<usize>

fn sub_assign(&mut self, other: &'a Wrapping<usize>)

Performs the -= operation.

impl<'a> SubAssign<&'a Wrapping<i64>> for Wrapping<i64>

fn sub_assign(&mut self, other: &'a Wrapping<i64>)

Performs the -= operation.

impl SubAssign<Wrapping<i16>> for Wrapping<i16>

fn sub_assign(&mut self, other: Wrapping<i16>)

Performs the -= operation.

impl<'a> SubAssign<&'a Wrapping<u32>> for Wrapping<u32>

fn sub_assign(&mut self, other: &'a Wrapping<u32>)

Performs the -= operation.

impl SubAssign<Wrapping<u8>> for Wrapping<u8>

fn sub_assign(&mut self, other: Wrapping<u8>)

Performs the -= operation.

impl<'a> SubAssign<&'a Wrapping<i128>> for Wrapping<i128>

fn sub_assign(&mut self, other: &'a Wrapping<i128>)

Performs the -= operation.

impl SubAssign<Wrapping<u16>> for Wrapping<u16>

fn sub_assign(&mut self, other: Wrapping<u16>)

Performs the -= operation.

impl<'a> SubAssign<&'a Wrapping<u16>> for Wrapping<u16>

fn sub_assign(&mut self, other: &'a Wrapping<u16>)

Performs the -= operation.

impl SubAssign<Wrapping<isize>> for Wrapping<isize>

fn sub_assign(&mut self, other: Wrapping<isize>)

Performs the -= operation.

impl SubAssign<Wrapping<u32>> for Wrapping<u32>

fn sub_assign(&mut self, other: Wrapping<u32>)

Performs the -= operation.

impl<'a> SubAssign<&'a Wrapping<i8>> for Wrapping<i8>

fn sub_assign(&mut self, other: &'a Wrapping<i8>)

Performs the -= operation.

impl<'a> SubAssign<&'a Wrapping<i32>> for Wrapping<i32>

fn sub_assign(&mut self, other: &'a Wrapping<i32>)

Performs the -= operation.

impl<'a> SubAssign<&'a Wrapping<u8>> for Wrapping<u8>

fn sub_assign(&mut self, other: &'a Wrapping<u8>)

Performs the -= operation.

impl SubAssign<Wrapping<i128>> for Wrapping<i128>

fn sub_assign(&mut self, other: Wrapping<i128>)

Performs the -= operation.

impl<'a> SubAssign<&'a Wrapping<isize>> for Wrapping<isize>

fn sub_assign(&mut self, other: &'a Wrapping<isize>)

Performs the -= operation.

impl SubAssign<Wrapping<u64>> for Wrapping<u64>

fn sub_assign(&mut self, other: Wrapping<u64>)

Performs the -= operation.

impl SubAssign<Wrapping<usize>> for Wrapping<usize>

fn sub_assign(&mut self, other: Wrapping<usize>)

Performs the -= operation.

impl AddAssign<Wrapping<u8>> for Wrapping<u8>

fn add_assign(&mut self, other: Wrapping<u8>)

Performs the += operation.

impl AddAssign<Wrapping<usize>> for Wrapping<usize>

fn add_assign(&mut self, other: Wrapping<usize>)

Performs the += operation.

impl<'a> AddAssign<&'a Wrapping<i64>> for Wrapping<i64>

fn add_assign(&mut self, other: &'a Wrapping<i64>)

Performs the += operation.

impl AddAssign<Wrapping<u128>> for Wrapping<u128>

fn add_assign(&mut self, other: Wrapping<u128>)

Performs the += operation.

impl<'a> AddAssign<&'a Wrapping<u16>> for Wrapping<u16>

fn add_assign(&mut self, other: &'a Wrapping<u16>)

Performs the += operation.

impl AddAssign<Wrapping<u16>> for Wrapping<u16>

fn add_assign(&mut self, other: Wrapping<u16>)

Performs the += operation.

impl<'a> AddAssign<&'a Wrapping<i32>> for Wrapping<i32>

fn add_assign(&mut self, other: &'a Wrapping<i32>)

Performs the += operation.

impl AddAssign<Wrapping<isize>> for Wrapping<isize>

fn add_assign(&mut self, other: Wrapping<isize>)

Performs the += operation.

impl AddAssign<Wrapping<i64>> for Wrapping<i64>

fn add_assign(&mut self, other: Wrapping<i64>)

Performs the += operation.

impl<'a> AddAssign<&'a Wrapping<u128>> for Wrapping<u128>

fn add_assign(&mut self, other: &'a Wrapping<u128>)

Performs the += operation.

impl AddAssign<Wrapping<i8>> for Wrapping<i8>

fn add_assign(&mut self, other: Wrapping<i8>)

Performs the += operation.

impl AddAssign<Wrapping<u32>> for Wrapping<u32>

fn add_assign(&mut self, other: Wrapping<u32>)

Performs the += operation.

impl<'a> AddAssign<&'a Wrapping<u8>> for Wrapping<u8>

fn add_assign(&mut self, other: &'a Wrapping<u8>)

Performs the += operation.

impl AddAssign<Wrapping<u64>> for Wrapping<u64>

fn add_assign(&mut self, other: Wrapping<u64>)

Performs the += operation.

impl<'a> AddAssign<&'a Wrapping<isize>> for Wrapping<isize>

fn add_assign(&mut self, other: &'a Wrapping<isize>)

Performs the += operation.

impl AddAssign<Wrapping<i16>> for Wrapping<i16>

fn add_assign(&mut self, other: Wrapping<i16>)

Performs the += operation.

impl<'a> AddAssign<&'a Wrapping<i8>> for Wrapping<i8>

fn add_assign(&mut self, other: &'a Wrapping<i8>)

Performs the += operation.

impl<'a> AddAssign<&'a Wrapping<i16>> for Wrapping<i16>

fn add_assign(&mut self, other: &'a Wrapping<i16>)

Performs the += operation.

impl AddAssign<Wrapping<i128>> for Wrapping<i128>

fn add_assign(&mut self, other: Wrapping<i128>)

Performs the += operation.

impl<'a> AddAssign<&'a Wrapping<u32>> for Wrapping<u32>

fn add_assign(&mut self, other: &'a Wrapping<u32>)

Performs the += operation.

impl AddAssign<Wrapping<i32>> for Wrapping<i32>

fn add_assign(&mut self, other: Wrapping<i32>)

Performs the += operation.

impl<'a> AddAssign<&'a Wrapping<i128>> for Wrapping<i128>

fn add_assign(&mut self, other: &'a Wrapping<i128>)

Performs the += operation.

impl<'a> AddAssign<&'a Wrapping<usize>> for Wrapping<usize>

fn add_assign(&mut self, other: &'a Wrapping<usize>)

Performs the += operation.

impl<'a> AddAssign<&'a Wrapping<u64>> for Wrapping<u64>

fn add_assign(&mut self, other: &'a Wrapping<u64>)

Performs the += operation.

impl<'a> Neg for &'a Wrapping<i128>

type Output = <Wrapping<i128> as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <Wrapping<i128> as Neg>::Output

Performs the unary - operation.

impl Neg for Wrapping<i128>

type Output = Wrapping<i128>

The resulting type after applying the - operator.

fn neg(self) -> Wrapping<i128>

Performs the unary - operation.

impl Neg for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the - operator.

fn neg(self) -> Wrapping<u8>

Performs the unary - operation.

impl<'a> Neg for &'a Wrapping<i64>

type Output = <Wrapping<i64> as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <Wrapping<i64> as Neg>::Output

Performs the unary - operation.

impl Neg for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the - operator.

fn neg(self) -> Wrapping<i64>

Performs the unary - operation.

impl<'a> Neg for &'a Wrapping<usize>

type Output = <Wrapping<usize> as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <Wrapping<usize> as Neg>::Output

Performs the unary - operation.

impl Neg for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the - operator.

fn neg(self) -> Wrapping<isize>

Performs the unary - operation.

impl Neg for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the - operator.

fn neg(self) -> Wrapping<u16>

Performs the unary - operation.

impl Neg for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the - operator.

fn neg(self) -> Wrapping<u32>

Performs the unary - operation.

impl<'a> Neg for &'a Wrapping<i8>

type Output = <Wrapping<i8> as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <Wrapping<i8> as Neg>::Output

Performs the unary - operation.

impl<'a> Neg for &'a Wrapping<i16>

type Output = <Wrapping<i16> as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <Wrapping<i16> as Neg>::Output

Performs the unary - operation.

impl<'a> Neg for &'a Wrapping<isize>

type Output = <Wrapping<isize> as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <Wrapping<isize> as Neg>::Output

Performs the unary - operation.

impl Neg for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the - operator.

fn neg(self) -> Wrapping<i32>

Performs the unary - operation.

impl Neg for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the - operator.

fn neg(self) -> Wrapping<u64>

Performs the unary - operation.

impl Neg for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the - operator.

fn neg(self) -> Wrapping<i8>

Performs the unary - operation.

impl<'a> Neg for &'a Wrapping<u16>

type Output = <Wrapping<u16> as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <Wrapping<u16> as Neg>::Output

Performs the unary - operation.

impl<'a> Neg for &'a Wrapping<u8>

type Output = <Wrapping<u8> as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <Wrapping<u8> as Neg>::Output

Performs the unary - operation.

impl<'a> Neg for &'a Wrapping<u64>

type Output = <Wrapping<u64> as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <Wrapping<u64> as Neg>::Output

Performs the unary - operation.

impl Neg for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the - operator.

fn neg(self) -> Wrapping<i16>

Performs the unary - operation.

impl<'a> Neg for &'a Wrapping<u32>

type Output = <Wrapping<u32> as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <Wrapping<u32> as Neg>::Output

Performs the unary - operation.

impl Neg for Wrapping<u128>

type Output = Wrapping<u128>

The resulting type after applying the - operator.

fn neg(self) -> Wrapping<u128>

Performs the unary - operation.

impl<'a> Neg for &'a Wrapping<u128>

type Output = <Wrapping<u128> as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <Wrapping<u128> as Neg>::Output

Performs the unary - operation.

impl<'a> Neg for &'a Wrapping<i32>

type Output = <Wrapping<i32> as Neg>::Output

The resulting type after applying the - operator.

fn neg(self) -> <Wrapping<i32> as Neg>::Output

Performs the unary - operation.

impl Neg for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the - operator.

fn neg(self) -> Wrapping<usize>

Performs the unary - operation.

impl<'a> ShrAssign<&'a usize> for Wrapping<i64>

fn shr_assign(&mut self, other: &'a usize)

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<i32>

fn shr_assign(&mut self, other: usize)

Performs the >>= operation.

impl<'a> ShrAssign<&'a usize> for Wrapping<i8>

fn shr_assign(&mut self, other: &'a usize)

Performs the >>= operation.

impl<'a> ShrAssign<&'a usize> for Wrapping<u16>

fn shr_assign(&mut self, other: &'a usize)

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<i16>

fn shr_assign(&mut self, other: usize)

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<i8>

fn shr_assign(&mut self, other: usize)

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<u32>

fn shr_assign(&mut self, other: usize)

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<u16>

fn shr_assign(&mut self, other: usize)

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<usize>

fn shr_assign(&mut self, other: usize)

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<u8>

fn shr_assign(&mut self, other: usize)

Performs the >>= operation.

impl<'a> ShrAssign<&'a usize> for Wrapping<i32>

fn shr_assign(&mut self, other: &'a usize)

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<i64>

fn shr_assign(&mut self, other: usize)

Performs the >>= operation.

impl<'a> ShrAssign<&'a usize> for Wrapping<u32>

fn shr_assign(&mut self, other: &'a usize)

Performs the >>= operation.

impl<'a> ShrAssign<&'a usize> for Wrapping<u8>

fn shr_assign(&mut self, other: &'a usize)

Performs the >>= operation.

impl<'a> ShrAssign<&'a usize> for Wrapping<isize>

fn shr_assign(&mut self, other: &'a usize)

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<u64>

fn shr_assign(&mut self, other: usize)

Performs the >>= operation.

impl<'a> ShrAssign<&'a usize> for Wrapping<i16>

fn shr_assign(&mut self, other: &'a usize)

Performs the >>= operation.

impl<'a> ShrAssign<&'a usize> for Wrapping<usize>

fn shr_assign(&mut self, other: &'a usize)

Performs the >>= operation.

impl<'a> ShrAssign<&'a usize> for Wrapping<u64>

fn shr_assign(&mut self, other: &'a usize)

Performs the >>= operation.

impl ShrAssign<usize> for Wrapping<isize>

fn shr_assign(&mut self, other: usize)

Performs the >>= operation.

impl<T> LowerHex for Wrapping<T> where     T: LowerHex,

fn fmt(&self, f: &mut Formatter) -> Result<(), Error>

Formats the value using the given formatter.

impl<T> Display for Wrapping<T> where     T: Display,

fn fmt(&self, f: &mut Formatter) -> Result<(), Error>

Formats the value using the given formatter.

impl Sub<Wrapping<u128>> for Wrapping<u128>

type Output = Wrapping<u128>

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<u128>) -> Wrapping<u128>

Performs the - operation.

impl<'a> Sub<Wrapping<u8>> for &'a Wrapping<u8>

type Output = <Wrapping<u8> as Sub<Wrapping<u8>>>::Output

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<u8>) -> <Wrapping<u8> as Sub<Wrapping<u8>>>::Output

Performs the - operation.

impl<'a> Sub<&'a Wrapping<u128>> for Wrapping<u128>

type Output = <Wrapping<u128> as Sub<Wrapping<u128>>>::Output

The resulting type after applying the - operator.

fn sub(     self,     other: &'a Wrapping<u128> ) -> <Wrapping<u128> as Sub<Wrapping<u128>>>::Output

Performs the - operation.

impl<'a, 'b> Sub<&'a Wrapping<i64>> for &'b Wrapping<i64>

type Output = <Wrapping<i64> as Sub<Wrapping<i64>>>::Output

The resulting type after applying the - operator.

fn sub(     self,     other: &'a Wrapping<i64> ) -> <Wrapping<i64> as Sub<Wrapping<i64>>>::Output

Performs the - operation.

impl<'a, 'b> Sub<&'a Wrapping<i128>> for &'b Wrapping<i128>

type Output = <Wrapping<i128> as Sub<Wrapping<i128>>>::Output

The resulting type after applying the - operator.

fn sub(     self,     other: &'a Wrapping<i128> ) -> <Wrapping<i128> as Sub<Wrapping<i128>>>::Output

Performs the - operation.

impl Sub<Wrapping<isize>> for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<isize>) -> Wrapping<isize>

Performs the - operation.

impl<'a> Sub<Wrapping<i16>> for &'a Wrapping<i16>

type Output = <Wrapping<i16> as Sub<Wrapping<i16>>>::Output

The resulting type after applying the - operator.

fn sub(     self,     other: Wrapping<i16> ) -> <Wrapping<i16> as Sub<Wrapping<i16>>>::Output

Performs the - operation.

impl<'a, 'b> Sub<&'a Wrapping<u8>> for &'b Wrapping<u8>

type Output = <Wrapping<u8> as Sub<Wrapping<u8>>>::Output

The resulting type after applying the - operator.

fn sub(     self,     other: &'a Wrapping<u8> ) -> <Wrapping<u8> as Sub<Wrapping<u8>>>::Output

Performs the - operation.

impl<'a, 'b> Sub<&'a Wrapping<isize>> for &'b Wrapping<isize>

type Output = <Wrapping<isize> as Sub<Wrapping<isize>>>::Output

The resulting type after applying the - operator.

fn sub(     self,     other: &'a Wrapping<isize> ) -> <Wrapping<isize> as Sub<Wrapping<isize>>>::Output

Performs the - operation.

impl<'a> Sub<&'a Wrapping<u8>> for Wrapping<u8>

type Output = <Wrapping<u8> as Sub<Wrapping<u8>>>::Output

The resulting type after applying the - operator.

fn sub(     self,     other: &'a Wrapping<u8> ) -> <Wrapping<u8> as Sub<Wrapping<u8>>>::Output

Performs the - operation.

impl<'a> Sub<Wrapping<i32>> for &'a Wrapping<i32>

type Output = <Wrapping<i32> as Sub<Wrapping<i32>>>::Output

The resulting type after applying the - operator.

fn sub(     self,     other: Wrapping<i32> ) -> <Wrapping<i32> as Sub<Wrapping<i32>>>::Output

Performs the - operation.

impl Sub<Wrapping<u64>> for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<u64>) -> Wrapping<u64>

Performs the - operation.

impl<'a> Sub<Wrapping<i128>> for &'a Wrapping<i128>

type Output = <Wrapping<i128> as Sub<Wrapping<i128>>>::Output

The resulting type after applying the - operator.

fn sub(     self,     other: Wrapping<i128> ) -> <Wrapping<i128> as Sub<Wrapping<i128>>>::Output

Performs the - operation.

impl<'a> Sub<&'a Wrapping<i16>> for Wrapping<i16>

type Output = <Wrapping<i16> as Sub<Wrapping<i16>>>::Output

The resulting type after applying the - operator.

fn sub(     self,     other: &'a Wrapping<i16> ) -> <Wrapping<i16> as Sub<Wrapping<i16>>>::Output

Performs the - operation.

impl<'a, 'b> Sub<&'a Wrapping<i8>> for &'b Wrapping<i8>

type Output = <Wrapping<i8> as Sub<Wrapping<i8>>>::Output

The resulting type after applying the - operator.

fn sub(     self,     other: &'a Wrapping<i8> ) -> <Wrapping<i8> as Sub<Wrapping<i8>>>::Output

Performs the - operation.

impl Sub<Wrapping<u8>> for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<u8>) -> Wrapping<u8>

Performs the - operation.

impl Sub<Wrapping<i16>> for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<i16>) -> Wrapping<i16>

Performs the - operation.

impl<'a> Sub<&'a Wrapping<u16>> for Wrapping<u16>

type Output = <Wrapping<u16> as Sub<Wrapping<u16>>>::Output

The resulting type after applying the - operator.

fn sub(     self,     other: &'a Wrapping<u16> ) -> <Wrapping<u16> as Sub<Wrapping<u16>>>::Output

Performs the - operation.

impl<'a, 'b> Sub<&'a Wrapping<usize>> for &'b Wrapping<usize>

type Output = <Wrapping<usize> as Sub<Wrapping<usize>>>::Output

The resulting type after applying the - operator.

fn sub(     self,     other: &'a Wrapping<usize> ) -> <Wrapping<usize> as Sub<Wrapping<usize>>>::Output

Performs the - operation.

impl<'a, 'b> Sub<&'a Wrapping<u64>> for &'b Wrapping<u64>

type Output = <Wrapping<u64> as Sub<Wrapping<u64>>>::Output

The resulting type after applying the - operator.

fn sub(     self,     other: &'a Wrapping<u64> ) -> <Wrapping<u64> as Sub<Wrapping<u64>>>::Output

Performs the - operation.

impl<'a> Sub<Wrapping<u16>> for &'a Wrapping<u16>

type Output = <Wrapping<u16> as Sub<Wrapping<u16>>>::Output

The resulting type after applying the - operator.

fn sub(     self,     other: Wrapping<u16> ) -> <Wrapping<u16> as Sub<Wrapping<u16>>>::Output

Performs the - operation.

impl<'a> Sub<&'a Wrapping<u32>> for Wrapping<u32>

type Output = <Wrapping<u32> as Sub<Wrapping<u32>>>::Output

The resulting type after applying the - operator.

fn sub(     self,     other: &'a Wrapping<u32> ) -> <Wrapping<u32> as Sub<Wrapping<u32>>>::Output

Performs the - operation.

impl Sub<Wrapping<i64>> for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<i64>) -> Wrapping<i64>

Performs the - operation.

impl<'a, 'b> Sub<&'a Wrapping<i32>> for &'b Wrapping<i32>

type Output = <Wrapping<i32> as Sub<Wrapping<i32>>>::Output

The resulting type after applying the - operator.

fn sub(     self,     other: &'a Wrapping<i32> ) -> <Wrapping<i32> as Sub<Wrapping<i32>>>::Output

Performs the - operation.

impl<'a, 'b> Sub<&'a Wrapping<u128>> for &'b Wrapping<u128>

type Output = <Wrapping<u128> as Sub<Wrapping<u128>>>::Output

The resulting type after applying the - operator.

fn sub(     self,     other: &'a Wrapping<u128> ) -> <Wrapping<u128> as Sub<Wrapping<u128>>>::Output

Performs the - operation.

impl<'a> Sub<Wrapping<u64>> for &'a Wrapping<u64>

type Output = <Wrapping<u64> as Sub<Wrapping<u64>>>::Output

The resulting type after applying the - operator.

fn sub(     self,     other: Wrapping<u64> ) -> <Wrapping<u64> as Sub<Wrapping<u64>>>::Output

Performs the - operation.

impl<'a> Sub<Wrapping<u128>> for &'a Wrapping<u128>

type Output = <Wrapping<u128> as Sub<Wrapping<u128>>>::Output

The resulting type after applying the - operator.

fn sub(     self,     other: Wrapping<u128> ) -> <Wrapping<u128> as Sub<Wrapping<u128>>>::Output

Performs the - operation.

impl<'a> Sub<&'a Wrapping<i8>> for Wrapping<i8>

type Output = <Wrapping<i8> as Sub<Wrapping<i8>>>::Output

The resulting type after applying the - operator.

fn sub(     self,     other: &'a Wrapping<i8> ) -> <Wrapping<i8> as Sub<Wrapping<i8>>>::Output

Performs the - operation.

impl<'a> Sub<&'a Wrapping<i32>> for Wrapping<i32>

type Output = <Wrapping<i32> as Sub<Wrapping<i32>>>::Output

The resulting type after applying the - operator.

fn sub(     self,     other: &'a Wrapping<i32> ) -> <Wrapping<i32> as Sub<Wrapping<i32>>>::Output

Performs the - operation.

impl<'a> Sub<Wrapping<u32>> for &'a Wrapping<u32>

type Output = <Wrapping<u32> as Sub<Wrapping<u32>>>::Output

The resulting type after applying the - operator.

fn sub(     self,     other: Wrapping<u32> ) -> <Wrapping<u32> as Sub<Wrapping<u32>>>::Output

Performs the - operation.

impl<'a> Sub<&'a Wrapping<isize>> for Wrapping<isize>

type Output = <Wrapping<isize> as Sub<Wrapping<isize>>>::Output

The resulting type after applying the - operator.

fn sub(     self,     other: &'a Wrapping<isize> ) -> <Wrapping<isize> as Sub<Wrapping<isize>>>::Output

Performs the - operation.

impl<'a> Sub<Wrapping<isize>> for &'a Wrapping<isize>

type Output = <Wrapping<isize> as Sub<Wrapping<isize>>>::Output

The resulting type after applying the - operator.

fn sub(     self,     other: Wrapping<isize> ) -> <Wrapping<isize> as Sub<Wrapping<isize>>>::Output

Performs the - operation.

impl<'a> Sub<&'a Wrapping<i128>> for Wrapping<i128>

type Output = <Wrapping<i128> as Sub<Wrapping<i128>>>::Output

The resulting type after applying the - operator.

fn sub(     self,     other: &'a Wrapping<i128> ) -> <Wrapping<i128> as Sub<Wrapping<i128>>>::Output

Performs the - operation.

impl Sub<Wrapping<i128>> for Wrapping<i128>

type Output = Wrapping<i128>

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<i128>) -> Wrapping<i128>

Performs the - operation.

impl<'a> Sub<&'a Wrapping<i64>> for Wrapping<i64>

type Output = <Wrapping<i64> as Sub<Wrapping<i64>>>::Output

The resulting type after applying the - operator.

fn sub(     self,     other: &'a Wrapping<i64> ) -> <Wrapping<i64> as Sub<Wrapping<i64>>>::Output

Performs the - operation.

impl Sub<Wrapping<usize>> for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<usize>) -> Wrapping<usize>

Performs the - operation.

impl<'a, 'b> Sub<&'a Wrapping<u32>> for &'b Wrapping<u32>

type Output = <Wrapping<u32> as Sub<Wrapping<u32>>>::Output

The resulting type after applying the - operator.

fn sub(     self,     other: &'a Wrapping<u32> ) -> <Wrapping<u32> as Sub<Wrapping<u32>>>::Output

Performs the - operation.

impl<'a, 'b> Sub<&'a Wrapping<u16>> for &'b Wrapping<u16>

type Output = <Wrapping<u16> as Sub<Wrapping<u16>>>::Output

The resulting type after applying the - operator.

fn sub(     self,     other: &'a Wrapping<u16> ) -> <Wrapping<u16> as Sub<Wrapping<u16>>>::Output

Performs the - operation.

impl<'a> Sub<Wrapping<i64>> for &'a Wrapping<i64>

type Output = <Wrapping<i64> as Sub<Wrapping<i64>>>::Output

The resulting type after applying the - operator.

fn sub(     self,     other: Wrapping<i64> ) -> <Wrapping<i64> as Sub<Wrapping<i64>>>::Output

Performs the - operation.

impl<'a, 'b> Sub<&'a Wrapping<i16>> for &'b Wrapping<i16>

type Output = <Wrapping<i16> as Sub<Wrapping<i16>>>::Output

The resulting type after applying the - operator.

fn sub(     self,     other: &'a Wrapping<i16> ) -> <Wrapping<i16> as Sub<Wrapping<i16>>>::Output

Performs the - operation.

impl Sub<Wrapping<i8>> for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<i8>) -> Wrapping<i8>

Performs the - operation.

impl<'a> Sub<Wrapping<usize>> for &'a Wrapping<usize>

type Output = <Wrapping<usize> as Sub<Wrapping<usize>>>::Output

The resulting type after applying the - operator.

fn sub(     self,     other: Wrapping<usize> ) -> <Wrapping<usize> as Sub<Wrapping<usize>>>::Output

Performs the - operation.

impl Sub<Wrapping<u16>> for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<u16>) -> Wrapping<u16>

Performs the - operation.

impl Sub<Wrapping<i32>> for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<i32>) -> Wrapping<i32>

Performs the - operation.

impl<'a> Sub<&'a Wrapping<u64>> for Wrapping<u64>

type Output = <Wrapping<u64> as Sub<Wrapping<u64>>>::Output

The resulting type after applying the - operator.

fn sub(     self,     other: &'a Wrapping<u64> ) -> <Wrapping<u64> as Sub<Wrapping<u64>>>::Output

Performs the - operation.

impl<'a> Sub<&'a Wrapping<usize>> for Wrapping<usize>

type Output = <Wrapping<usize> as Sub<Wrapping<usize>>>::Output

The resulting type after applying the - operator.

fn sub(     self,     other: &'a Wrapping<usize> ) -> <Wrapping<usize> as Sub<Wrapping<usize>>>::Output

Performs the - operation.

impl Sub<Wrapping<u32>> for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<u32>) -> Wrapping<u32>

Performs the - operation.

impl<'a> Sub<Wrapping<i8>> for &'a Wrapping<i8>

type Output = <Wrapping<i8> as Sub<Wrapping<i8>>>::Output

The resulting type after applying the - operator.

fn sub(self, other: Wrapping<i8>) -> <Wrapping<i8> as Sub<Wrapping<i8>>>::Output

Performs the - operation.

impl Shr<usize> for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> Wrapping<i8>

Performs the >> operation.

impl Shr<usize> for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> Wrapping<i32>

Performs the >> operation.

impl Shr<usize> for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> Wrapping<u16>

Performs the >> operation.

impl Shr<usize> for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> Wrapping<isize>

Performs the >> operation.

impl Shr<usize> for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> Wrapping<u64>

Performs the >> operation.

impl Shr<usize> for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> Wrapping<u32>

Performs the >> operation.

impl Shr<usize> for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> Wrapping<i64>

Performs the >> operation.

impl Shr<usize> for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> Wrapping<i16>

Performs the >> operation.

impl Shr<usize> for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> Wrapping<usize>

Performs the >> operation.

impl Shr<usize> for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the >> operator.

fn shr(self, other: usize) -> Wrapping<u8>

Performs the >> operation.

impl<T> Clone for Wrapping<T> where     T: Clone,

fn clone(&self) -> Wrapping<T>

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<T> PartialOrd<Wrapping<T>> for Wrapping<T> where     T: PartialOrd<T>,

fn partial_cmp(&self, other: &Wrapping<T>) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Wrapping<T>) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Wrapping<T>) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Wrapping<T>) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Wrapping<T>) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<'a> BitXor<&'a Wrapping<isize>> for Wrapping<isize>

type Output = <Wrapping<isize> as BitXor<Wrapping<isize>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(     self,     other: &'a Wrapping<isize> ) -> <Wrapping<isize> as BitXor<Wrapping<isize>>>::Output

Performs the ^ operation.

impl<'a> BitXor<&'a Wrapping<i8>> for Wrapping<i8>

type Output = <Wrapping<i8> as BitXor<Wrapping<i8>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(     self,     other: &'a Wrapping<i8> ) -> <Wrapping<i8> as BitXor<Wrapping<i8>>>::Output

Performs the ^ operation.

impl BitXor<Wrapping<u8>> for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<u8>) -> Wrapping<u8>

Performs the ^ operation.

impl<'a> BitXor<Wrapping<u128>> for &'a Wrapping<u128>

type Output = <Wrapping<u128> as BitXor<Wrapping<u128>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(     self,     other: Wrapping<u128> ) -> <Wrapping<u128> as BitXor<Wrapping<u128>>>::Output

Performs the ^ operation.

impl<'a> BitXor<Wrapping<u32>> for &'a Wrapping<u32>

type Output = <Wrapping<u32> as BitXor<Wrapping<u32>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(     self,     other: Wrapping<u32> ) -> <Wrapping<u32> as BitXor<Wrapping<u32>>>::Output

Performs the ^ operation.

impl BitXor<Wrapping<i128>> for Wrapping<i128>

type Output = Wrapping<i128>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<i128>) -> Wrapping<i128>

Performs the ^ operation.

impl<'a> BitXor<Wrapping<u64>> for &'a Wrapping<u64>

type Output = <Wrapping<u64> as BitXor<Wrapping<u64>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(     self,     other: Wrapping<u64> ) -> <Wrapping<u64> as BitXor<Wrapping<u64>>>::Output

Performs the ^ operation.

impl<'a> BitXor<Wrapping<u8>> for &'a Wrapping<u8>

type Output = <Wrapping<u8> as BitXor<Wrapping<u8>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(     self,     other: Wrapping<u8> ) -> <Wrapping<u8> as BitXor<Wrapping<u8>>>::Output

Performs the ^ operation.

impl<'a, 'b> BitXor<&'a Wrapping<u16>> for &'b Wrapping<u16>

type Output = <Wrapping<u16> as BitXor<Wrapping<u16>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(     self,     other: &'a Wrapping<u16> ) -> <Wrapping<u16> as BitXor<Wrapping<u16>>>::Output

Performs the ^ operation.

impl<'a> BitXor<Wrapping<i8>> for &'a Wrapping<i8>

type Output = <Wrapping<i8> as BitXor<Wrapping<i8>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(     self,     other: Wrapping<i8> ) -> <Wrapping<i8> as BitXor<Wrapping<i8>>>::Output

Performs the ^ operation.

impl<'a, 'b> BitXor<&'a Wrapping<u64>> for &'b Wrapping<u64>

type Output = <Wrapping<u64> as BitXor<Wrapping<u64>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(     self,     other: &'a Wrapping<u64> ) -> <Wrapping<u64> as BitXor<Wrapping<u64>>>::Output

Performs the ^ operation.

impl<'a> BitXor<&'a Wrapping<u128>> for Wrapping<u128>

type Output = <Wrapping<u128> as BitXor<Wrapping<u128>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(     self,     other: &'a Wrapping<u128> ) -> <Wrapping<u128> as BitXor<Wrapping<u128>>>::Output

Performs the ^ operation.

impl BitXor<Wrapping<usize>> for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<usize>) -> Wrapping<usize>

Performs the ^ operation.

impl<'a, 'b> BitXor<&'a Wrapping<u128>> for &'b Wrapping<u128>

type Output = <Wrapping<u128> as BitXor<Wrapping<u128>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(     self,     other: &'a Wrapping<u128> ) -> <Wrapping<u128> as BitXor<Wrapping<u128>>>::Output

Performs the ^ operation.

impl BitXor<Wrapping<u16>> for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<u16>) -> Wrapping<u16>

Performs the ^ operation.

impl<'a> BitXor<&'a Wrapping<u32>> for Wrapping<u32>

type Output = <Wrapping<u32> as BitXor<Wrapping<u32>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(     self,     other: &'a Wrapping<u32> ) -> <Wrapping<u32> as BitXor<Wrapping<u32>>>::Output

Performs the ^ operation.

impl<'a> BitXor<&'a Wrapping<u8>> for Wrapping<u8>

type Output = <Wrapping<u8> as BitXor<Wrapping<u8>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(     self,     other: &'a Wrapping<u8> ) -> <Wrapping<u8> as BitXor<Wrapping<u8>>>::Output

Performs the ^ operation.

impl<'a, 'b> BitXor<&'a Wrapping<usize>> for &'b Wrapping<usize>

type Output = <Wrapping<usize> as BitXor<Wrapping<usize>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(     self,     other: &'a Wrapping<usize> ) -> <Wrapping<usize> as BitXor<Wrapping<usize>>>::Output

Performs the ^ operation.

impl<'a> BitXor<&'a Wrapping<i32>> for Wrapping<i32>

type Output = <Wrapping<i32> as BitXor<Wrapping<i32>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(     self,     other: &'a Wrapping<i32> ) -> <Wrapping<i32> as BitXor<Wrapping<i32>>>::Output

Performs the ^ operation.

impl BitXor<Wrapping<i64>> for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<i64>) -> Wrapping<i64>

Performs the ^ operation.

impl<'a, 'b> BitXor<&'a Wrapping<i16>> for &'b Wrapping<i16>

type Output = <Wrapping<i16> as BitXor<Wrapping<i16>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(     self,     other: &'a Wrapping<i16> ) -> <Wrapping<i16> as BitXor<Wrapping<i16>>>::Output

Performs the ^ operation.

impl<'a> BitXor<&'a Wrapping<i128>> for Wrapping<i128>

type Output = <Wrapping<i128> as BitXor<Wrapping<i128>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(     self,     other: &'a Wrapping<i128> ) -> <Wrapping<i128> as BitXor<Wrapping<i128>>>::Output

Performs the ^ operation.

impl BitXor<Wrapping<u128>> for Wrapping<u128>

type Output = Wrapping<u128>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<u128>) -> Wrapping<u128>

Performs the ^ operation.

impl<'a> BitXor<&'a Wrapping<u64>> for Wrapping<u64>

type Output = <Wrapping<u64> as BitXor<Wrapping<u64>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(     self,     other: &'a Wrapping<u64> ) -> <Wrapping<u64> as BitXor<Wrapping<u64>>>::Output

Performs the ^ operation.

impl<'a> BitXor<Wrapping<i128>> for &'a Wrapping<i128>

type Output = <Wrapping<i128> as BitXor<Wrapping<i128>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(     self,     other: Wrapping<i128> ) -> <Wrapping<i128> as BitXor<Wrapping<i128>>>::Output

Performs the ^ operation.

impl<'a> BitXor<&'a Wrapping<u16>> for Wrapping<u16>

type Output = <Wrapping<u16> as BitXor<Wrapping<u16>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(     self,     other: &'a Wrapping<u16> ) -> <Wrapping<u16> as BitXor<Wrapping<u16>>>::Output

Performs the ^ operation.

impl BitXor<Wrapping<isize>> for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<isize>) -> Wrapping<isize>

Performs the ^ operation.

impl<'a> BitXor<Wrapping<i32>> for &'a Wrapping<i32>

type Output = <Wrapping<i32> as BitXor<Wrapping<i32>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(     self,     other: Wrapping<i32> ) -> <Wrapping<i32> as BitXor<Wrapping<i32>>>::Output

Performs the ^ operation.

impl BitXor<Wrapping<u32>> for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<u32>) -> Wrapping<u32>

Performs the ^ operation.

impl<'a, 'b> BitXor<&'a Wrapping<i8>> for &'b Wrapping<i8>

type Output = <Wrapping<i8> as BitXor<Wrapping<i8>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(     self,     other: &'a Wrapping<i8> ) -> <Wrapping<i8> as BitXor<Wrapping<i8>>>::Output

Performs the ^ operation.

impl<'a, 'b> BitXor<&'a Wrapping<i32>> for &'b Wrapping<i32>

type Output = <Wrapping<i32> as BitXor<Wrapping<i32>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(     self,     other: &'a Wrapping<i32> ) -> <Wrapping<i32> as BitXor<Wrapping<i32>>>::Output

Performs the ^ operation.

impl<'a, 'b> BitXor<&'a Wrapping<u8>> for &'b Wrapping<u8>

type Output = <Wrapping<u8> as BitXor<Wrapping<u8>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(     self,     other: &'a Wrapping<u8> ) -> <Wrapping<u8> as BitXor<Wrapping<u8>>>::Output

Performs the ^ operation.

impl<'a> BitXor<Wrapping<isize>> for &'a Wrapping<isize>

type Output = <Wrapping<isize> as BitXor<Wrapping<isize>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(     self,     other: Wrapping<isize> ) -> <Wrapping<isize> as BitXor<Wrapping<isize>>>::Output

Performs the ^ operation.

impl<'a> BitXor<Wrapping<i16>> for &'a Wrapping<i16>

type Output = <Wrapping<i16> as BitXor<Wrapping<i16>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(     self,     other: Wrapping<i16> ) -> <Wrapping<i16> as BitXor<Wrapping<i16>>>::Output

Performs the ^ operation.

impl<'a> BitXor<&'a Wrapping<usize>> for Wrapping<usize>

type Output = <Wrapping<usize> as BitXor<Wrapping<usize>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(     self,     other: &'a Wrapping<usize> ) -> <Wrapping<usize> as BitXor<Wrapping<usize>>>::Output

Performs the ^ operation.

impl<'a, 'b> BitXor<&'a Wrapping<i128>> for &'b Wrapping<i128>

type Output = <Wrapping<i128> as BitXor<Wrapping<i128>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(     self,     other: &'a Wrapping<i128> ) -> <Wrapping<i128> as BitXor<Wrapping<i128>>>::Output

Performs the ^ operation.

impl<'a> BitXor<Wrapping<i64>> for &'a Wrapping<i64>

type Output = <Wrapping<i64> as BitXor<Wrapping<i64>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(     self,     other: Wrapping<i64> ) -> <Wrapping<i64> as BitXor<Wrapping<i64>>>::Output

Performs the ^ operation.

impl BitXor<Wrapping<i32>> for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<i32>) -> Wrapping<i32>

Performs the ^ operation.

impl BitXor<Wrapping<u64>> for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<u64>) -> Wrapping<u64>

Performs the ^ operation.

impl<'a> BitXor<Wrapping<u16>> for &'a Wrapping<u16>

type Output = <Wrapping<u16> as BitXor<Wrapping<u16>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(     self,     other: Wrapping<u16> ) -> <Wrapping<u16> as BitXor<Wrapping<u16>>>::Output

Performs the ^ operation.

impl BitXor<Wrapping<i16>> for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<i16>) -> Wrapping<i16>

Performs the ^ operation.

impl BitXor<Wrapping<i8>> for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the ^ operator.

fn bitxor(self, other: Wrapping<i8>) -> Wrapping<i8>

Performs the ^ operation.

impl<'a, 'b> BitXor<&'a Wrapping<isize>> for &'b Wrapping<isize>

type Output = <Wrapping<isize> as BitXor<Wrapping<isize>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(     self,     other: &'a Wrapping<isize> ) -> <Wrapping<isize> as BitXor<Wrapping<isize>>>::Output

Performs the ^ operation.

impl<'a, 'b> BitXor<&'a Wrapping<i64>> for &'b Wrapping<i64>

type Output = <Wrapping<i64> as BitXor<Wrapping<i64>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(     self,     other: &'a Wrapping<i64> ) -> <Wrapping<i64> as BitXor<Wrapping<i64>>>::Output

Performs the ^ operation.

impl<'a> BitXor<Wrapping<usize>> for &'a Wrapping<usize>

type Output = <Wrapping<usize> as BitXor<Wrapping<usize>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(     self,     other: Wrapping<usize> ) -> <Wrapping<usize> as BitXor<Wrapping<usize>>>::Output

Performs the ^ operation.

impl<'a> BitXor<&'a Wrapping<i16>> for Wrapping<i16>

type Output = <Wrapping<i16> as BitXor<Wrapping<i16>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(     self,     other: &'a Wrapping<i16> ) -> <Wrapping<i16> as BitXor<Wrapping<i16>>>::Output

Performs the ^ operation.

impl<'a> BitXor<&'a Wrapping<i64>> for Wrapping<i64>

type Output = <Wrapping<i64> as BitXor<Wrapping<i64>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(     self,     other: &'a Wrapping<i64> ) -> <Wrapping<i64> as BitXor<Wrapping<i64>>>::Output

Performs the ^ operation.

impl<'a, 'b> BitXor<&'a Wrapping<u32>> for &'b Wrapping<u32>

type Output = <Wrapping<u32> as BitXor<Wrapping<u32>>>::Output

The resulting type after applying the ^ operator.

fn bitxor(     self,     other: &'a Wrapping<u32> ) -> <Wrapping<u32> as BitXor<Wrapping<u32>>>::Output

Performs the ^ operation.

impl<T> Ord for Wrapping<T> where     T: Ord,

fn cmp(&self, other: &Wrapping<T>) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

impl Not for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the ! operator.

fn not(self) -> Wrapping<u8>

Performs the unary ! operation.

impl Not for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the ! operator.

fn not(self) -> Wrapping<u16>

Performs the unary ! operation.

impl<'a> Not for &'a Wrapping<u8>

type Output = <Wrapping<u8> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Wrapping<u8> as Not>::Output

Performs the unary ! operation.

impl Not for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the ! operator.

fn not(self) -> Wrapping<u64>

Performs the unary ! operation.

impl Not for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the ! operator.

fn not(self) -> Wrapping<i64>

Performs the unary ! operation.

impl Not for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the ! operator.

fn not(self) -> Wrapping<u32>

Performs the unary ! operation.

impl<'a> Not for &'a Wrapping<u64>

type Output = <Wrapping<u64> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Wrapping<u64> as Not>::Output

Performs the unary ! operation.

impl<'a> Not for &'a Wrapping<i8>

type Output = <Wrapping<i8> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Wrapping<i8> as Not>::Output

Performs the unary ! operation.

impl<'a> Not for &'a Wrapping<i64>

type Output = <Wrapping<i64> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Wrapping<i64> as Not>::Output

Performs the unary ! operation.

impl Not for Wrapping<u128>

type Output = Wrapping<u128>

The resulting type after applying the ! operator.

fn not(self) -> Wrapping<u128>

Performs the unary ! operation.

impl Not for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the ! operator.

fn not(self) -> Wrapping<i8>

Performs the unary ! operation.

impl<'a> Not for &'a Wrapping<u128>

type Output = <Wrapping<u128> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Wrapping<u128> as Not>::Output

Performs the unary ! operation.

impl<'a> Not for &'a Wrapping<i128>

type Output = <Wrapping<i128> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Wrapping<i128> as Not>::Output

Performs the unary ! operation.

impl<'a> Not for &'a Wrapping<i16>

type Output = <Wrapping<i16> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Wrapping<i16> as Not>::Output

Performs the unary ! operation.

impl Not for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the ! operator.

fn not(self) -> Wrapping<usize>

Performs the unary ! operation.

impl Not for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the ! operator.

fn not(self) -> Wrapping<i16>

Performs the unary ! operation.

impl Not for Wrapping<i128>

type Output = Wrapping<i128>

The resulting type after applying the ! operator.

fn not(self) -> Wrapping<i128>

Performs the unary ! operation.

impl<'a> Not for &'a Wrapping<u32>

type Output = <Wrapping<u32> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Wrapping<u32> as Not>::Output

Performs the unary ! operation.

impl<'a> Not for &'a Wrapping<i32>

type Output = <Wrapping<i32> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Wrapping<i32> as Not>::Output

Performs the unary ! operation.

impl Not for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the ! operator.

fn not(self) -> Wrapping<i32>

Performs the unary ! operation.

impl Not for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the ! operator.

fn not(self) -> Wrapping<isize>

Performs the unary ! operation.

impl<'a> Not for &'a Wrapping<usize>

type Output = <Wrapping<usize> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Wrapping<usize> as Not>::Output

Performs the unary ! operation.

impl<'a> Not for &'a Wrapping<u16>

type Output = <Wrapping<u16> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Wrapping<u16> as Not>::Output

Performs the unary ! operation.

impl<'a> Not for &'a Wrapping<isize>

type Output = <Wrapping<isize> as Not>::Output

The resulting type after applying the ! operator.

fn not(self) -> <Wrapping<isize> as Not>::Output

Performs the unary ! operation.

impl<T> Copy for Wrapping<T> where     T: Copy,

impl<T> Eq for Wrapping<T> where     T: Eq,

impl<T> PartialEq<Wrapping<T>> for Wrapping<T> where     T: PartialEq<T>,

fn eq(&self, other: &Wrapping<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Wrapping<T>) -> bool

This method tests for !=.

impl<'a, 'b> Rem<&'a Wrapping<u16>> for &'b Wrapping<u16>

type Output = <Wrapping<u16> as Rem<Wrapping<u16>>>::Output

The resulting type after applying the % operator.

fn rem(     self,     other: &'a Wrapping<u16> ) -> <Wrapping<u16> as Rem<Wrapping<u16>>>::Output

Performs the % operation.

impl<'a, 'b> Rem<&'a Wrapping<i16>> for &'b Wrapping<i16>

type Output = <Wrapping<i16> as Rem<Wrapping<i16>>>::Output

The resulting type after applying the % operator.

fn rem(     self,     other: &'a Wrapping<i16> ) -> <Wrapping<i16> as Rem<Wrapping<i16>>>::Output

Performs the % operation.

impl<'a, 'b> Rem<&'a Wrapping<usize>> for &'b Wrapping<usize>

type Output = <Wrapping<usize> as Rem<Wrapping<usize>>>::Output

The resulting type after applying the % operator.

fn rem(     self,     other: &'a Wrapping<usize> ) -> <Wrapping<usize> as Rem<Wrapping<usize>>>::Output

Performs the % operation.

impl Rem<Wrapping<u64>> for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<u64>) -> Wrapping<u64>

Performs the % operation.

impl<'a> Rem<Wrapping<u128>> for &'a Wrapping<u128>

type Output = <Wrapping<u128> as Rem<Wrapping<u128>>>::Output

The resulting type after applying the % operator.

fn rem(     self,     other: Wrapping<u128> ) -> <Wrapping<u128> as Rem<Wrapping<u128>>>::Output

Performs the % operation.

impl<'a, 'b> Rem<&'a Wrapping<u128>> for &'b Wrapping<u128>

type Output = <Wrapping<u128> as Rem<Wrapping<u128>>>::Output

The resulting type after applying the % operator.

fn rem(     self,     other: &'a Wrapping<u128> ) -> <Wrapping<u128> as Rem<Wrapping<u128>>>::Output

Performs the % operation.

impl<'a> Rem<&'a Wrapping<i16>> for Wrapping<i16>

type Output = <Wrapping<i16> as Rem<Wrapping<i16>>>::Output

The resulting type after applying the % operator.

fn rem(     self,     other: &'a Wrapping<i16> ) -> <Wrapping<i16> as Rem<Wrapping<i16>>>::Output

Performs the % operation.

impl<'a> Rem<&'a Wrapping<isize>> for Wrapping<isize>

type Output = <Wrapping<isize> as Rem<Wrapping<isize>>>::Output

The resulting type after applying the % operator.

fn rem(     self,     other: &'a Wrapping<isize> ) -> <Wrapping<isize> as Rem<Wrapping<isize>>>::Output

Performs the % operation.

impl<'a> Rem<Wrapping<u8>> for &'a Wrapping<u8>

type Output = <Wrapping<u8> as Rem<Wrapping<u8>>>::Output

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<u8>) -> <Wrapping<u8> as Rem<Wrapping<u8>>>::Output

Performs the % operation.

impl<'a, 'b> Rem<&'a Wrapping<isize>> for &'b Wrapping<isize>

type Output = <Wrapping<isize> as Rem<Wrapping<isize>>>::Output

The resulting type after applying the % operator.

fn rem(     self,     other: &'a Wrapping<isize> ) -> <Wrapping<isize> as Rem<Wrapping<isize>>>::Output

Performs the % operation.

impl<'a> Rem<Wrapping<isize>> for &'a Wrapping<isize>

type Output = <Wrapping<isize> as Rem<Wrapping<isize>>>::Output

The resulting type after applying the % operator.

fn rem(     self,     other: Wrapping<isize> ) -> <Wrapping<isize> as Rem<Wrapping<isize>>>::Output

Performs the % operation.

impl<'a> Rem<&'a Wrapping<i8>> for Wrapping<i8>

type Output = <Wrapping<i8> as Rem<Wrapping<i8>>>::Output

The resulting type after applying the % operator.

fn rem(     self,     other: &'a Wrapping<i8> ) -> <Wrapping<i8> as Rem<Wrapping<i8>>>::Output

Performs the % operation.

impl Rem<Wrapping<usize>> for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<usize>) -> Wrapping<usize>

Performs the % operation.

impl<'a, 'b> Rem<&'a Wrapping<u32>> for &'b Wrapping<u32>

type Output = <Wrapping<u32> as Rem<Wrapping<u32>>>::Output

The resulting type after applying the % operator.

fn rem(     self,     other: &'a Wrapping<u32> ) -> <Wrapping<u32> as Rem<Wrapping<u32>>>::Output

Performs the % operation.

impl<'a, 'b> Rem<&'a Wrapping<u64>> for &'b Wrapping<u64>

type Output = <Wrapping<u64> as Rem<Wrapping<u64>>>::Output

The resulting type after applying the % operator.

fn rem(     self,     other: &'a Wrapping<u64> ) -> <Wrapping<u64> as Rem<Wrapping<u64>>>::Output

Performs the % operation.

impl Rem<Wrapping<u16>> for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<u16>) -> Wrapping<u16>

Performs the % operation.

impl Rem<Wrapping<i128>> for Wrapping<i128>

type Output = Wrapping<i128>

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<i128>) -> Wrapping<i128>

Performs the % operation.

impl<'a> Rem<Wrapping<u64>> for &'a Wrapping<u64>

type Output = <Wrapping<u64> as Rem<Wrapping<u64>>>::Output

The resulting type after applying the % operator.

fn rem(     self,     other: Wrapping<u64> ) -> <Wrapping<u64> as Rem<Wrapping<u64>>>::Output

Performs the % operation.

impl<'a> Rem<&'a Wrapping<u128>> for Wrapping<u128>

type Output = <Wrapping<u128> as Rem<Wrapping<u128>>>::Output

The resulting type after applying the % operator.

fn rem(     self,     other: &'a Wrapping<u128> ) -> <Wrapping<u128> as Rem<Wrapping<u128>>>::Output

Performs the % operation.

impl<'a> Rem<Wrapping<u32>> for &'a Wrapping<u32>

type Output = <Wrapping<u32> as Rem<Wrapping<u32>>>::Output

The resulting type after applying the % operator.

fn rem(     self,     other: Wrapping<u32> ) -> <Wrapping<u32> as Rem<Wrapping<u32>>>::Output

Performs the % operation.

impl<'a> Rem<&'a Wrapping<i32>> for Wrapping<i32>

type Output = <Wrapping<i32> as Rem<Wrapping<i32>>>::Output

The resulting type after applying the % operator.

fn rem(     self,     other: &'a Wrapping<i32> ) -> <Wrapping<i32> as Rem<Wrapping<i32>>>::Output

Performs the % operation.

impl<'a> Rem<&'a Wrapping<i128>> for Wrapping<i128>

type Output = <Wrapping<i128> as Rem<Wrapping<i128>>>::Output

The resulting type after applying the % operator.

fn rem(     self,     other: &'a Wrapping<i128> ) -> <Wrapping<i128> as Rem<Wrapping<i128>>>::Output

Performs the % operation.

impl<'a> Rem<&'a Wrapping<usize>> for Wrapping<usize>

type Output = <Wrapping<usize> as Rem<Wrapping<usize>>>::Output

The resulting type after applying the % operator.

fn rem(     self,     other: &'a Wrapping<usize> ) -> <Wrapping<usize> as Rem<Wrapping<usize>>>::Output

Performs the % operation.

impl<'a, 'b> Rem<&'a Wrapping<i8>> for &'b Wrapping<i8>

type Output = <Wrapping<i8> as Rem<Wrapping<i8>>>::Output

The resulting type after applying the % operator.

fn rem(     self,     other: &'a Wrapping<i8> ) -> <Wrapping<i8> as Rem<Wrapping<i8>>>::Output

Performs the % operation.

impl<'a> Rem<&'a Wrapping<i64>> for Wrapping<i64>

type Output = <Wrapping<i64> as Rem<Wrapping<i64>>>::Output

The resulting type after applying the % operator.

fn rem(     self,     other: &'a Wrapping<i64> ) -> <Wrapping<i64> as Rem<Wrapping<i64>>>::Output

Performs the % operation.

impl<'a, 'b> Rem<&'a Wrapping<i32>> for &'b Wrapping<i32>

type Output = <Wrapping<i32> as Rem<Wrapping<i32>>>::Output

The resulting type after applying the % operator.

fn rem(     self,     other: &'a Wrapping<i32> ) -> <Wrapping<i32> as Rem<Wrapping<i32>>>::Output

Performs the % operation.

impl<'a, 'b> Rem<&'a Wrapping<i128>> for &'b Wrapping<i128>

type Output = <Wrapping<i128> as Rem<Wrapping<i128>>>::Output

The resulting type after applying the % operator.

fn rem(     self,     other: &'a Wrapping<i128> ) -> <Wrapping<i128> as Rem<Wrapping<i128>>>::Output

Performs the % operation.

impl<'a> Rem<&'a Wrapping<u16>> for Wrapping<u16>

type Output = <Wrapping<u16> as Rem<Wrapping<u16>>>::Output

The resulting type after applying the % operator.

fn rem(     self,     other: &'a Wrapping<u16> ) -> <Wrapping<u16> as Rem<Wrapping<u16>>>::Output

Performs the % operation.

impl Rem<Wrapping<i32>> for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<i32>) -> Wrapping<i32>

Performs the % operation.

impl<'a> Rem<Wrapping<usize>> for &'a Wrapping<usize>

type Output = <Wrapping<usize> as Rem<Wrapping<usize>>>::Output

The resulting type after applying the % operator.

fn rem(     self,     other: Wrapping<usize> ) -> <Wrapping<usize> as Rem<Wrapping<usize>>>::Output

Performs the % operation.

impl Rem<Wrapping<u8>> for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<u8>) -> Wrapping<u8>

Performs the % operation.

impl<'a, 'b> Rem<&'a Wrapping<u8>> for &'b Wrapping<u8>

type Output = <Wrapping<u8> as Rem<Wrapping<u8>>>::Output

The resulting type after applying the % operator.

fn rem(     self,     other: &'a Wrapping<u8> ) -> <Wrapping<u8> as Rem<Wrapping<u8>>>::Output

Performs the % operation.

impl<'a> Rem<Wrapping<i16>> for &'a Wrapping<i16>

type Output = <Wrapping<i16> as Rem<Wrapping<i16>>>::Output

The resulting type after applying the % operator.

fn rem(     self,     other: Wrapping<i16> ) -> <Wrapping<i16> as Rem<Wrapping<i16>>>::Output

Performs the % operation.

impl<'a> Rem<Wrapping<u16>> for &'a Wrapping<u16>

type Output = <Wrapping<u16> as Rem<Wrapping<u16>>>::Output

The resulting type after applying the % operator.

fn rem(     self,     other: Wrapping<u16> ) -> <Wrapping<u16> as Rem<Wrapping<u16>>>::Output

Performs the % operation.

impl Rem<Wrapping<u32>> for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<u32>) -> Wrapping<u32>

Performs the % operation.

impl<'a> Rem<Wrapping<i8>> for &'a Wrapping<i8>

type Output = <Wrapping<i8> as Rem<Wrapping<i8>>>::Output

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<i8>) -> <Wrapping<i8> as Rem<Wrapping<i8>>>::Output

Performs the % operation.

impl<'a> Rem<&'a Wrapping<u64>> for Wrapping<u64>

type Output = <Wrapping<u64> as Rem<Wrapping<u64>>>::Output

The resulting type after applying the % operator.

fn rem(     self,     other: &'a Wrapping<u64> ) -> <Wrapping<u64> as Rem<Wrapping<u64>>>::Output

Performs the % operation.

impl Rem<Wrapping<u128>> for Wrapping<u128>

type Output = Wrapping<u128>

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<u128>) -> Wrapping<u128>

Performs the % operation.

impl<'a> Rem<&'a Wrapping<u32>> for Wrapping<u32>

type Output = <Wrapping<u32> as Rem<Wrapping<u32>>>::Output

The resulting type after applying the % operator.

fn rem(     self,     other: &'a Wrapping<u32> ) -> <Wrapping<u32> as Rem<Wrapping<u32>>>::Output

Performs the % operation.

impl<'a, 'b> Rem<&'a Wrapping<i64>> for &'b Wrapping<i64>

type Output = <Wrapping<i64> as Rem<Wrapping<i64>>>::Output

The resulting type after applying the % operator.

fn rem(     self,     other: &'a Wrapping<i64> ) -> <Wrapping<i64> as Rem<Wrapping<i64>>>::Output

Performs the % operation.

impl<'a> Rem<&'a Wrapping<u8>> for Wrapping<u8>

type Output = <Wrapping<u8> as Rem<Wrapping<u8>>>::Output

The resulting type after applying the % operator.

fn rem(     self,     other: &'a Wrapping<u8> ) -> <Wrapping<u8> as Rem<Wrapping<u8>>>::Output

Performs the % operation.

impl Rem<Wrapping<i64>> for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<i64>) -> Wrapping<i64>

Performs the % operation.

impl Rem<Wrapping<isize>> for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<isize>) -> Wrapping<isize>

Performs the % operation.

impl<'a> Rem<Wrapping<i32>> for &'a Wrapping<i32>

type Output = <Wrapping<i32> as Rem<Wrapping<i32>>>::Output

The resulting type after applying the % operator.

fn rem(     self,     other: Wrapping<i32> ) -> <Wrapping<i32> as Rem<Wrapping<i32>>>::Output

Performs the % operation.

impl<'a> Rem<Wrapping<i64>> for &'a Wrapping<i64>

type Output = <Wrapping<i64> as Rem<Wrapping<i64>>>::Output

The resulting type after applying the % operator.

fn rem(     self,     other: Wrapping<i64> ) -> <Wrapping<i64> as Rem<Wrapping<i64>>>::Output

Performs the % operation.

impl Rem<Wrapping<i16>> for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<i16>) -> Wrapping<i16>

Performs the % operation.

impl Rem<Wrapping<i8>> for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the % operator.

fn rem(self, other: Wrapping<i8>) -> Wrapping<i8>

Performs the % operation.

impl<'a> Rem<Wrapping<i128>> for &'a Wrapping<i128>

type Output = <Wrapping<i128> as Rem<Wrapping<i128>>>::Output

The resulting type after applying the % operator.

fn rem(     self,     other: Wrapping<i128> ) -> <Wrapping<i128> as Rem<Wrapping<i128>>>::Output

Performs the % operation.

impl<T> Binary for Wrapping<T> where     T: Binary,

fn fmt(&self, f: &mut Formatter) -> Result<(), Error>

Formats the value using the given formatter.

impl Product<Wrapping<i16>> for Wrapping<i16>

fn product<I>(iter: I) -> Wrapping<i16> where     I: Iterator<Item = Wrapping<i16>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl Product<Wrapping<u64>> for Wrapping<u64>

fn product<I>(iter: I) -> Wrapping<u64> where     I: Iterator<Item = Wrapping<u64>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl Product<Wrapping<i8>> for Wrapping<i8>

fn product<I>(iter: I) -> Wrapping<i8> where     I: Iterator<Item = Wrapping<i8>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<'a> Product<&'a Wrapping<i128>> for Wrapping<i128>

fn product<I>(iter: I) -> Wrapping<i128> where     I: Iterator<Item = &'a Wrapping<i128>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl Product<Wrapping<i128>> for Wrapping<i128>

fn product<I>(iter: I) -> Wrapping<i128> where     I: Iterator<Item = Wrapping<i128>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<'a> Product<&'a Wrapping<u128>> for Wrapping<u128>

fn product<I>(iter: I) -> Wrapping<u128> where     I: Iterator<Item = &'a Wrapping<u128>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl Product<Wrapping<u32>> for Wrapping<u32>

fn product<I>(iter: I) -> Wrapping<u32> where     I: Iterator<Item = Wrapping<u32>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<'a> Product<&'a Wrapping<i16>> for Wrapping<i16>

fn product<I>(iter: I) -> Wrapping<i16> where     I: Iterator<Item = &'a Wrapping<i16>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl Product<Wrapping<u128>> for Wrapping<u128>

fn product<I>(iter: I) -> Wrapping<u128> where     I: Iterator<Item = Wrapping<u128>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl Product<Wrapping<usize>> for Wrapping<usize>

fn product<I>(iter: I) -> Wrapping<usize> where     I: Iterator<Item = Wrapping<usize>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl Product<Wrapping<u8>> for Wrapping<u8>

fn product<I>(iter: I) -> Wrapping<u8> where     I: Iterator<Item = Wrapping<u8>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl Product<Wrapping<i64>> for Wrapping<i64>

fn product<I>(iter: I) -> Wrapping<i64> where     I: Iterator<Item = Wrapping<i64>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<'a> Product<&'a Wrapping<i64>> for Wrapping<i64>

fn product<I>(iter: I) -> Wrapping<i64> where     I: Iterator<Item = &'a Wrapping<i64>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<'a> Product<&'a Wrapping<u32>> for Wrapping<u32>

fn product<I>(iter: I) -> Wrapping<u32> where     I: Iterator<Item = &'a Wrapping<u32>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl Product<Wrapping<i32>> for Wrapping<i32>

fn product<I>(iter: I) -> Wrapping<i32> where     I: Iterator<Item = Wrapping<i32>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<'a> Product<&'a Wrapping<u8>> for Wrapping<u8>

fn product<I>(iter: I) -> Wrapping<u8> where     I: Iterator<Item = &'a Wrapping<u8>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<'a> Product<&'a Wrapping<u16>> for Wrapping<u16>

fn product<I>(iter: I) -> Wrapping<u16> where     I: Iterator<Item = &'a Wrapping<u16>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<'a> Product<&'a Wrapping<i32>> for Wrapping<i32>

fn product<I>(iter: I) -> Wrapping<i32> where     I: Iterator<Item = &'a Wrapping<i32>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<'a> Product<&'a Wrapping<i8>> for Wrapping<i8>

fn product<I>(iter: I) -> Wrapping<i8> where     I: Iterator<Item = &'a Wrapping<i8>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<'a> Product<&'a Wrapping<usize>> for Wrapping<usize>

fn product<I>(iter: I) -> Wrapping<usize> where     I: Iterator<Item = &'a Wrapping<usize>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<'a> Product<&'a Wrapping<u64>> for Wrapping<u64>

fn product<I>(iter: I) -> Wrapping<u64> where     I: Iterator<Item = &'a Wrapping<u64>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<'a> Product<&'a Wrapping<isize>> for Wrapping<isize>

fn product<I>(iter: I) -> Wrapping<isize> where     I: Iterator<Item = &'a Wrapping<isize>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl Product<Wrapping<u16>> for Wrapping<u16>

fn product<I>(iter: I) -> Wrapping<u16> where     I: Iterator<Item = Wrapping<u16>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl Product<Wrapping<isize>> for Wrapping<isize>

fn product<I>(iter: I) -> Wrapping<isize> where     I: Iterator<Item = Wrapping<isize>>,

Method which takes an iterator and generates Self from the elements by multiplying the items.

impl<'a> Mul<Wrapping<usize>> for &'a Wrapping<usize>

type Output = <Wrapping<usize> as Mul<Wrapping<usize>>>::Output

The resulting type after applying the * operator.

fn mul(     self,     other: Wrapping<usize> ) -> <Wrapping<usize> as Mul<Wrapping<usize>>>::Output

Performs the * operation.

impl Mul<Wrapping<i8>> for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<i8>) -> Wrapping<i8>

Performs the * operation.

impl<'a> Mul<Wrapping<i8>> for &'a Wrapping<i8>

type Output = <Wrapping<i8> as Mul<Wrapping<i8>>>::Output

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<i8>) -> <Wrapping<i8> as Mul<Wrapping<i8>>>::Output

Performs the * operation.

impl<'a, 'b> Mul<&'a Wrapping<i8>> for &'b Wrapping<i8>

type Output = <Wrapping<i8> as Mul<Wrapping<i8>>>::Output

The resulting type after applying the * operator.

fn mul(     self,     other: &'a Wrapping<i8> ) -> <Wrapping<i8> as Mul<Wrapping<i8>>>::Output

Performs the * operation.

impl<'a> Mul<&'a Wrapping<u32>> for Wrapping<u32>

type Output = <Wrapping<u32> as Mul<Wrapping<u32>>>::Output

The resulting type after applying the * operator.

fn mul(     self,     other: &'a Wrapping<u32> ) -> <Wrapping<u32> as Mul<Wrapping<u32>>>::Output

Performs the * operation.

impl<'a> Mul<&'a Wrapping<u128>> for Wrapping<u128>

type Output = <Wrapping<u128> as Mul<Wrapping<u128>>>::Output

The resulting type after applying the * operator.

fn mul(     self,     other: &'a Wrapping<u128> ) -> <Wrapping<u128> as Mul<Wrapping<u128>>>::Output

Performs the * operation.

impl<'a> Mul<Wrapping<i128>> for &'a Wrapping<i128>

type Output = <Wrapping<i128> as Mul<Wrapping<i128>>>::Output

The resulting type after applying the * operator.

fn mul(     self,     other: Wrapping<i128> ) -> <Wrapping<i128> as Mul<Wrapping<i128>>>::Output

Performs the * operation.

impl<'a> Mul<&'a Wrapping<i64>> for Wrapping<i64>

type Output = <Wrapping<i64> as Mul<Wrapping<i64>>>::Output

The resulting type after applying the * operator.

fn mul(     self,     other: &'a Wrapping<i64> ) -> <Wrapping<i64> as Mul<Wrapping<i64>>>::Output

Performs the * operation.

impl<'a> Mul<&'a Wrapping<u8>> for Wrapping<u8>

type Output = <Wrapping<u8> as Mul<Wrapping<u8>>>::Output

The resulting type after applying the * operator.

fn mul(     self,     other: &'a Wrapping<u8> ) -> <Wrapping<u8> as Mul<Wrapping<u8>>>::Output

Performs the * operation.

impl Mul<Wrapping<u8>> for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<u8>) -> Wrapping<u8>

Performs the * operation.

impl<'a> Mul<&'a Wrapping<i16>> for Wrapping<i16>

type Output = <Wrapping<i16> as Mul<Wrapping<i16>>>::Output

The resulting type after applying the * operator.

fn mul(     self,     other: &'a Wrapping<i16> ) -> <Wrapping<i16> as Mul<Wrapping<i16>>>::Output

Performs the * operation.

impl<'a> Mul<&'a Wrapping<isize>> for Wrapping<isize>

type Output = <Wrapping<isize> as Mul<Wrapping<isize>>>::Output

The resulting type after applying the * operator.

fn mul(     self,     other: &'a Wrapping<isize> ) -> <Wrapping<isize> as Mul<Wrapping<isize>>>::Output

Performs the * operation.

impl<'a> Mul<Wrapping<u16>> for &'a Wrapping<u16>

type Output = <Wrapping<u16> as Mul<Wrapping<u16>>>::Output

The resulting type after applying the * operator.

fn mul(     self,     other: Wrapping<u16> ) -> <Wrapping<u16> as Mul<Wrapping<u16>>>::Output

Performs the * operation.

impl<'a, 'b> Mul<&'a Wrapping<i128>> for &'b Wrapping<i128>

type Output = <Wrapping<i128> as Mul<Wrapping<i128>>>::Output

The resulting type after applying the * operator.

fn mul(     self,     other: &'a Wrapping<i128> ) -> <Wrapping<i128> as Mul<Wrapping<i128>>>::Output

Performs the * operation.

impl<'a, 'b> Mul<&'a Wrapping<i32>> for &'b Wrapping<i32>

type Output = <Wrapping<i32> as Mul<Wrapping<i32>>>::Output

The resulting type after applying the * operator.

fn mul(     self,     other: &'a Wrapping<i32> ) -> <Wrapping<i32> as Mul<Wrapping<i32>>>::Output

Performs the * operation.

impl<'a, 'b> Mul<&'a Wrapping<u32>> for &'b Wrapping<u32>

type Output = <Wrapping<u32> as Mul<Wrapping<u32>>>::Output

The resulting type after applying the * operator.

fn mul(     self,     other: &'a Wrapping<u32> ) -> <Wrapping<u32> as Mul<Wrapping<u32>>>::Output

Performs the * operation.

impl Mul<Wrapping<u64>> for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<u64>) -> Wrapping<u64>

Performs the * operation.

impl<'a> Mul<Wrapping<u128>> for &'a Wrapping<u128>

type Output = <Wrapping<u128> as Mul<Wrapping<u128>>>::Output

The resulting type after applying the * operator.

fn mul(     self,     other: Wrapping<u128> ) -> <Wrapping<u128> as Mul<Wrapping<u128>>>::Output

Performs the * operation.

impl<'a, 'b> Mul<&'a Wrapping<u128>> for &'b Wrapping<u128>

type Output = <Wrapping<u128> as Mul<Wrapping<u128>>>::Output

The resulting type after applying the * operator.

fn mul(     self,     other: &'a Wrapping<u128> ) -> <Wrapping<u128> as Mul<Wrapping<u128>>>::Output

Performs the * operation.

impl Mul<Wrapping<u32>> for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<u32>) -> Wrapping<u32>

Performs the * operation.

impl<'a> Mul<Wrapping<u32>> for &'a Wrapping<u32>

type Output = <Wrapping<u32> as Mul<Wrapping<u32>>>::Output

The resulting type after applying the * operator.

fn mul(     self,     other: Wrapping<u32> ) -> <Wrapping<u32> as Mul<Wrapping<u32>>>::Output

Performs the * operation.

impl Mul<Wrapping<i16>> for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<i16>) -> Wrapping<i16>

Performs the * operation.

impl<'a> Mul<&'a Wrapping<i32>> for Wrapping<i32>

type Output = <Wrapping<i32> as Mul<Wrapping<i32>>>::Output

The resulting type after applying the * operator.

fn mul(     self,     other: &'a Wrapping<i32> ) -> <Wrapping<i32> as Mul<Wrapping<i32>>>::Output

Performs the * operation.

impl<'a, 'b> Mul<&'a Wrapping<i16>> for &'b Wrapping<i16>

type Output = <Wrapping<i16> as Mul<Wrapping<i16>>>::Output

The resulting type after applying the * operator.

fn mul(     self,     other: &'a Wrapping<i16> ) -> <Wrapping<i16> as Mul<Wrapping<i16>>>::Output

Performs the * operation.

impl<'a> Mul<Wrapping<isize>> for &'a Wrapping<isize>

type Output = <Wrapping<isize> as Mul<Wrapping<isize>>>::Output

The resulting type after applying the * operator.

fn mul(     self,     other: Wrapping<isize> ) -> <Wrapping<isize> as Mul<Wrapping<isize>>>::Output

Performs the * operation.

impl<'a> Mul<Wrapping<i32>> for &'a Wrapping<i32>

type Output = <Wrapping<i32> as Mul<Wrapping<i32>>>::Output

The resulting type after applying the * operator.

fn mul(     self,     other: Wrapping<i32> ) -> <Wrapping<i32> as Mul<Wrapping<i32>>>::Output

Performs the * operation.

impl<'a, 'b> Mul<&'a Wrapping<usize>> for &'b Wrapping<usize>

type Output = <Wrapping<usize> as Mul<Wrapping<usize>>>::Output

The resulting type after applying the * operator.

fn mul(     self,     other: &'a Wrapping<usize> ) -> <Wrapping<usize> as Mul<Wrapping<usize>>>::Output

Performs the * operation.

impl<'a> Mul<Wrapping<i16>> for &'a Wrapping<i16>

type Output = <Wrapping<i16> as Mul<Wrapping<i16>>>::Output

The resulting type after applying the * operator.

fn mul(     self,     other: Wrapping<i16> ) -> <Wrapping<i16> as Mul<Wrapping<i16>>>::Output

Performs the * operation.

impl<'a> Mul<Wrapping<i64>> for &'a Wrapping<i64>

type Output = <Wrapping<i64> as Mul<Wrapping<i64>>>::Output

The resulting type after applying the * operator.

fn mul(     self,     other: Wrapping<i64> ) -> <Wrapping<i64> as Mul<Wrapping<i64>>>::Output

Performs the * operation.

impl<'a> Mul<Wrapping<u64>> for &'a Wrapping<u64>

type Output = <Wrapping<u64> as Mul<Wrapping<u64>>>::Output

The resulting type after applying the * operator.

fn mul(     self,     other: Wrapping<u64> ) -> <Wrapping<u64> as Mul<Wrapping<u64>>>::Output

Performs the * operation.

impl Mul<Wrapping<u128>> for Wrapping<u128>

type Output = Wrapping<u128>

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<u128>) -> Wrapping<u128>

Performs the * operation.

impl<'a, 'b> Mul<&'a Wrapping<i64>> for &'b Wrapping<i64>

type Output = <Wrapping<i64> as Mul<Wrapping<i64>>>::Output

The resulting type after applying the * operator.

fn mul(     self,     other: &'a Wrapping<i64> ) -> <Wrapping<i64> as Mul<Wrapping<i64>>>::Output

Performs the * operation.

impl<'a, 'b> Mul<&'a Wrapping<isize>> for &'b Wrapping<isize>

type Output = <Wrapping<isize> as Mul<Wrapping<isize>>>::Output

The resulting type after applying the * operator.

fn mul(     self,     other: &'a Wrapping<isize> ) -> <Wrapping<isize> as Mul<Wrapping<isize>>>::Output

Performs the * operation.

impl<'a> Mul<&'a Wrapping<u16>> for Wrapping<u16>

type Output = <Wrapping<u16> as Mul<Wrapping<u16>>>::Output

The resulting type after applying the * operator.

fn mul(     self,     other: &'a Wrapping<u16> ) -> <Wrapping<u16> as Mul<Wrapping<u16>>>::Output

Performs the * operation.

impl Mul<Wrapping<usize>> for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<usize>) -> Wrapping<usize>

Performs the * operation.

impl<'a, 'b> Mul<&'a Wrapping<u64>> for &'b Wrapping<u64>

type Output = <Wrapping<u64> as Mul<Wrapping<u64>>>::Output

The resulting type after applying the * operator.

fn mul(     self,     other: &'a Wrapping<u64> ) -> <Wrapping<u64> as Mul<Wrapping<u64>>>::Output

Performs the * operation.

impl Mul<Wrapping<i64>> for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<i64>) -> Wrapping<i64>

Performs the * operation.

impl Mul<Wrapping<i128>> for Wrapping<i128>

type Output = Wrapping<i128>

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<i128>) -> Wrapping<i128>

Performs the * operation.

impl<'a> Mul<&'a Wrapping<i8>> for Wrapping<i8>

type Output = <Wrapping<i8> as Mul<Wrapping<i8>>>::Output

The resulting type after applying the * operator.

fn mul(     self,     other: &'a Wrapping<i8> ) -> <Wrapping<i8> as Mul<Wrapping<i8>>>::Output

Performs the * operation.

impl<'a, 'b> Mul<&'a Wrapping<u8>> for &'b Wrapping<u8>

type Output = <Wrapping<u8> as Mul<Wrapping<u8>>>::Output

The resulting type after applying the * operator.

fn mul(     self,     other: &'a Wrapping<u8> ) -> <Wrapping<u8> as Mul<Wrapping<u8>>>::Output

Performs the * operation.

impl<'a> Mul<&'a Wrapping<u64>> for Wrapping<u64>

type Output = <Wrapping<u64> as Mul<Wrapping<u64>>>::Output

The resulting type after applying the * operator.

fn mul(     self,     other: &'a Wrapping<u64> ) -> <Wrapping<u64> as Mul<Wrapping<u64>>>::Output

Performs the * operation.

impl Mul<Wrapping<isize>> for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<isize>) -> Wrapping<isize>

Performs the * operation.

impl Mul<Wrapping<i32>> for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<i32>) -> Wrapping<i32>

Performs the * operation.

impl Mul<Wrapping<u16>> for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<u16>) -> Wrapping<u16>

Performs the * operation.

impl<'a> Mul<&'a Wrapping<i128>> for Wrapping<i128>

type Output = <Wrapping<i128> as Mul<Wrapping<i128>>>::Output

The resulting type after applying the * operator.

fn mul(     self,     other: &'a Wrapping<i128> ) -> <Wrapping<i128> as Mul<Wrapping<i128>>>::Output

Performs the * operation.

impl<'a> Mul<&'a Wrapping<usize>> for Wrapping<usize>

type Output = <Wrapping<usize> as Mul<Wrapping<usize>>>::Output

The resulting type after applying the * operator.

fn mul(     self,     other: &'a Wrapping<usize> ) -> <Wrapping<usize> as Mul<Wrapping<usize>>>::Output

Performs the * operation.

impl<'a, 'b> Mul<&'a Wrapping<u16>> for &'b Wrapping<u16>

type Output = <Wrapping<u16> as Mul<Wrapping<u16>>>::Output

The resulting type after applying the * operator.

fn mul(     self,     other: &'a Wrapping<u16> ) -> <Wrapping<u16> as Mul<Wrapping<u16>>>::Output

Performs the * operation.

impl<'a> Mul<Wrapping<u8>> for &'a Wrapping<u8>

type Output = <Wrapping<u8> as Mul<Wrapping<u8>>>::Output

The resulting type after applying the * operator.

fn mul(self, other: Wrapping<u8>) -> <Wrapping<u8> as Mul<Wrapping<u8>>>::Output

Performs the * operation.

impl<T> Debug for Wrapping<T> where     T: Debug,

fn fmt(&self, f: &mut Formatter) -> Result<(), Error>

Formats the value using the given formatter.

impl Shl<usize> for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the << operator.

fn shl(self, other: usize) -> Wrapping<isize>

Performs the << operation.

impl Shl<usize> for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the << operator.

fn shl(self, other: usize) -> Wrapping<usize>

Performs the << operation.

impl Shl<usize> for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the << operator.

fn shl(self, other: usize) -> Wrapping<u16>

Performs the << operation.

impl Shl<usize> for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the << operator.

fn shl(self, other: usize) -> Wrapping<u32>

Performs the << operation.

impl Shl<usize> for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the << operator.

fn shl(self, other: usize) -> Wrapping<i8>

Performs the << operation.

impl Shl<usize> for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the << operator.

fn shl(self, other: usize) -> Wrapping<u8>

Performs the << operation.

impl Shl<usize> for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the << operator.

fn shl(self, other: usize) -> Wrapping<u64>

Performs the << operation.

impl Shl<usize> for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the << operator.

fn shl(self, other: usize) -> Wrapping<i64>

Performs the << operation.

impl Shl<usize> for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the << operator.

fn shl(self, other: usize) -> Wrapping<i32>

Performs the << operation.

impl Shl<usize> for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the << operator.

fn shl(self, other: usize) -> Wrapping<i16>

Performs the << operation.

impl<'a> BitAnd<&'a Wrapping<i128>> for Wrapping<i128>

type Output = <Wrapping<i128> as BitAnd<Wrapping<i128>>>::Output

The resulting type after applying the & operator.

fn bitand(     self,     other: &'a Wrapping<i128> ) -> <Wrapping<i128> as BitAnd<Wrapping<i128>>>::Output

Performs the & operation.

impl<'a> BitAnd<Wrapping<u32>> for &'a Wrapping<u32>

type Output = <Wrapping<u32> as BitAnd<Wrapping<u32>>>::Output

The resulting type after applying the & operator.

fn bitand(     self,     other: Wrapping<u32> ) -> <Wrapping<u32> as BitAnd<Wrapping<u32>>>::Output

Performs the & operation.

impl<'a, 'b> BitAnd<&'a Wrapping<i128>> for &'b Wrapping<i128>

type Output = <Wrapping<i128> as BitAnd<Wrapping<i128>>>::Output

The resulting type after applying the & operator.

fn bitand(     self,     other: &'a Wrapping<i128> ) -> <Wrapping<i128> as BitAnd<Wrapping<i128>>>::Output

Performs the & operation.

impl<'a> BitAnd<&'a Wrapping<i64>> for Wrapping<i64>

type Output = <Wrapping<i64> as BitAnd<Wrapping<i64>>>::Output

The resulting type after applying the & operator.

fn bitand(     self,     other: &'a Wrapping<i64> ) -> <Wrapping<i64> as BitAnd<Wrapping<i64>>>::Output

Performs the & operation.

impl<'a> BitAnd<Wrapping<u16>> for &'a Wrapping<u16>

type Output = <Wrapping<u16> as BitAnd<Wrapping<u16>>>::Output

The resulting type after applying the & operator.

fn bitand(     self,     other: Wrapping<u16> ) -> <Wrapping<u16> as BitAnd<Wrapping<u16>>>::Output

Performs the & operation.

impl BitAnd<Wrapping<i64>> for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<i64>) -> Wrapping<i64>

Performs the & operation.

impl<'a> BitAnd<Wrapping<i32>> for &'a Wrapping<i32>

type Output = <Wrapping<i32> as BitAnd<Wrapping<i32>>>::Output

The resulting type after applying the & operator.

fn bitand(     self,     other: Wrapping<i32> ) -> <Wrapping<i32> as BitAnd<Wrapping<i32>>>::Output

Performs the & operation.

impl BitAnd<Wrapping<u64>> for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<u64>) -> Wrapping<u64>

Performs the & operation.

impl<'a> BitAnd<Wrapping<i128>> for &'a Wrapping<i128>

type Output = <Wrapping<i128> as BitAnd<Wrapping<i128>>>::Output

The resulting type after applying the & operator.

fn bitand(     self,     other: Wrapping<i128> ) -> <Wrapping<i128> as BitAnd<Wrapping<i128>>>::Output

Performs the & operation.

impl<'a> BitAnd<Wrapping<u8>> for &'a Wrapping<u8>

type Output = <Wrapping<u8> as BitAnd<Wrapping<u8>>>::Output

The resulting type after applying the & operator.

fn bitand(     self,     other: Wrapping<u8> ) -> <Wrapping<u8> as BitAnd<Wrapping<u8>>>::Output

Performs the & operation.

impl<'a> BitAnd<Wrapping<i64>> for &'a Wrapping<i64>

type Output = <Wrapping<i64> as BitAnd<Wrapping<i64>>>::Output

The resulting type after applying the & operator.

fn bitand(     self,     other: Wrapping<i64> ) -> <Wrapping<i64> as BitAnd<Wrapping<i64>>>::Output

Performs the & operation.

impl BitAnd<Wrapping<isize>> for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<isize>) -> Wrapping<isize>

Performs the & operation.

impl BitAnd<Wrapping<usize>> for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<usize>) -> Wrapping<usize>

Performs the & operation.

impl<'a> BitAnd<&'a Wrapping<i32>> for Wrapping<i32>

type Output = <Wrapping<i32> as BitAnd<Wrapping<i32>>>::Output

The resulting type after applying the & operator.

fn bitand(     self,     other: &'a Wrapping<i32> ) -> <Wrapping<i32> as BitAnd<Wrapping<i32>>>::Output

Performs the & operation.

impl BitAnd<Wrapping<u32>> for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<u32>) -> Wrapping<u32>

Performs the & operation.

impl<'a, 'b> BitAnd<&'a Wrapping<u128>> for &'b Wrapping<u128>

type Output = <Wrapping<u128> as BitAnd<Wrapping<u128>>>::Output

The resulting type after applying the & operator.

fn bitand(     self,     other: &'a Wrapping<u128> ) -> <Wrapping<u128> as BitAnd<Wrapping<u128>>>::Output

Performs the & operation.

impl<'a, 'b> BitAnd<&'a Wrapping<i16>> for &'b Wrapping<i16>

type Output = <Wrapping<i16> as BitAnd<Wrapping<i16>>>::Output

The resulting type after applying the & operator.

fn bitand(     self,     other: &'a Wrapping<i16> ) -> <Wrapping<i16> as BitAnd<Wrapping<i16>>>::Output

Performs the & operation.

impl BitAnd<Wrapping<u8>> for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<u8>) -> Wrapping<u8>

Performs the & operation.

impl<'a> BitAnd<Wrapping<i8>> for &'a Wrapping<i8>

type Output = <Wrapping<i8> as BitAnd<Wrapping<i8>>>::Output

The resulting type after applying the & operator.

fn bitand(     self,     other: Wrapping<i8> ) -> <Wrapping<i8> as BitAnd<Wrapping<i8>>>::Output

Performs the & operation.

impl BitAnd<Wrapping<i8>> for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<i8>) -> Wrapping<i8>

Performs the & operation.

impl<'a, 'b> BitAnd<&'a Wrapping<isize>> for &'b Wrapping<isize>

type Output = <Wrapping<isize> as BitAnd<Wrapping<isize>>>::Output

The resulting type after applying the & operator.

fn bitand(     self,     other: &'a Wrapping<isize> ) -> <Wrapping<isize> as BitAnd<Wrapping<isize>>>::Output

Performs the & operation.

impl<'a> BitAnd<Wrapping<isize>> for &'a Wrapping<isize>

type Output = <Wrapping<isize> as BitAnd<Wrapping<isize>>>::Output

The resulting type after applying the & operator.

fn bitand(     self,     other: Wrapping<isize> ) -> <Wrapping<isize> as BitAnd<Wrapping<isize>>>::Output

Performs the & operation.

impl<'a, 'b> BitAnd<&'a Wrapping<i8>> for &'b Wrapping<i8>

type Output = <Wrapping<i8> as BitAnd<Wrapping<i8>>>::Output

The resulting type after applying the & operator.

fn bitand(     self,     other: &'a Wrapping<i8> ) -> <Wrapping<i8> as BitAnd<Wrapping<i8>>>::Output

Performs the & operation.

impl<'a, 'b> BitAnd<&'a Wrapping<i64>> for &'b Wrapping<i64>

type Output = <Wrapping<i64> as BitAnd<Wrapping<i64>>>::Output

The resulting type after applying the & operator.

fn bitand(     self,     other: &'a Wrapping<i64> ) -> <Wrapping<i64> as BitAnd<Wrapping<i64>>>::Output

Performs the & operation.

impl<'a> BitAnd<Wrapping<usize>> for &'a Wrapping<usize>

type Output = <Wrapping<usize> as BitAnd<Wrapping<usize>>>::Output

The resulting type after applying the & operator.

fn bitand(     self,     other: Wrapping<usize> ) -> <Wrapping<usize> as BitAnd<Wrapping<usize>>>::Output

Performs the & operation.

impl<'a> BitAnd<&'a Wrapping<u16>> for Wrapping<u16>

type Output = <Wrapping<u16> as BitAnd<Wrapping<u16>>>::Output

The resulting type after applying the & operator.

fn bitand(     self,     other: &'a Wrapping<u16> ) -> <Wrapping<u16> as BitAnd<Wrapping<u16>>>::Output

Performs the & operation.

impl BitAnd<Wrapping<i128>> for Wrapping<i128>

type Output = Wrapping<i128>

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<i128>) -> Wrapping<i128>

Performs the & operation.

impl<'a, 'b> BitAnd<&'a Wrapping<u64>> for &'b Wrapping<u64>

type Output = <Wrapping<u64> as BitAnd<Wrapping<u64>>>::Output

The resulting type after applying the & operator.

fn bitand(     self,     other: &'a Wrapping<u64> ) -> <Wrapping<u64> as BitAnd<Wrapping<u64>>>::Output

Performs the & operation.

impl BitAnd<Wrapping<i32>> for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<i32>) -> Wrapping<i32>

Performs the & operation.

impl BitAnd<Wrapping<u128>> for Wrapping<u128>

type Output = Wrapping<u128>

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<u128>) -> Wrapping<u128>

Performs the & operation.

impl<'a, 'b> BitAnd<&'a Wrapping<u16>> for &'b Wrapping<u16>

type Output = <Wrapping<u16> as BitAnd<Wrapping<u16>>>::Output

The resulting type after applying the & operator.

fn bitand(     self,     other: &'a Wrapping<u16> ) -> <Wrapping<u16> as BitAnd<Wrapping<u16>>>::Output

Performs the & operation.

impl<'a> BitAnd<&'a Wrapping<isize>> for Wrapping<isize>

type Output = <Wrapping<isize> as BitAnd<Wrapping<isize>>>::Output

The resulting type after applying the & operator.

fn bitand(     self,     other: &'a Wrapping<isize> ) -> <Wrapping<isize> as BitAnd<Wrapping<isize>>>::Output

Performs the & operation.

impl BitAnd<Wrapping<u16>> for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<u16>) -> Wrapping<u16>

Performs the & operation.

impl BitAnd<Wrapping<i16>> for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the & operator.

fn bitand(self, other: Wrapping<i16>) -> Wrapping<i16>

Performs the & operation.

impl<'a> BitAnd<&'a Wrapping<u32>> for Wrapping<u32>

type Output = <Wrapping<u32> as BitAnd<Wrapping<u32>>>::Output

The resulting type after applying the & operator.

fn bitand(     self,     other: &'a Wrapping<u32> ) -> <Wrapping<u32> as BitAnd<Wrapping<u32>>>::Output

Performs the & operation.

impl<'a> BitAnd<&'a Wrapping<u128>> for Wrapping<u128>

type Output = <Wrapping<u128> as BitAnd<Wrapping<u128>>>::Output

The resulting type after applying the & operator.

fn bitand(     self,     other: &'a Wrapping<u128> ) -> <Wrapping<u128> as BitAnd<Wrapping<u128>>>::Output

Performs the & operation.

impl<'a, 'b> BitAnd<&'a Wrapping<u8>> for &'b Wrapping<u8>

type Output = <Wrapping<u8> as BitAnd<Wrapping<u8>>>::Output

The resulting type after applying the & operator.

fn bitand(     self,     other: &'a Wrapping<u8> ) -> <Wrapping<u8> as BitAnd<Wrapping<u8>>>::Output

Performs the & operation.

impl<'a, 'b> BitAnd<&'a Wrapping<usize>> for &'b Wrapping<usize>

type Output = <Wrapping<usize> as BitAnd<Wrapping<usize>>>::Output

The resulting type after applying the & operator.

fn bitand(     self,     other: &'a Wrapping<usize> ) -> <Wrapping<usize> as BitAnd<Wrapping<usize>>>::Output

Performs the & operation.

impl<'a, 'b> BitAnd<&'a Wrapping<u32>> for &'b Wrapping<u32>

type Output = <Wrapping<u32> as BitAnd<Wrapping<u32>>>::Output

The resulting type after applying the & operator.

fn bitand(     self,     other: &'a Wrapping<u32> ) -> <Wrapping<u32> as BitAnd<Wrapping<u32>>>::Output

Performs the & operation.

impl<'a> BitAnd<Wrapping<u128>> for &'a Wrapping<u128>

type Output = <Wrapping<u128> as BitAnd<Wrapping<u128>>>::Output

The resulting type after applying the & operator.

fn bitand(     self,     other: Wrapping<u128> ) -> <Wrapping<u128> as BitAnd<Wrapping<u128>>>::Output

Performs the & operation.

impl<'a> BitAnd<&'a Wrapping<usize>> for Wrapping<usize>

type Output = <Wrapping<usize> as BitAnd<Wrapping<usize>>>::Output

The resulting type after applying the & operator.

fn bitand(     self,     other: &'a Wrapping<usize> ) -> <Wrapping<usize> as BitAnd<Wrapping<usize>>>::Output

Performs the & operation.

impl<'a> BitAnd<Wrapping<i16>> for &'a Wrapping<i16>

type Output = <Wrapping<i16> as BitAnd<Wrapping<i16>>>::Output

The resulting type after applying the & operator.

fn bitand(     self,     other: Wrapping<i16> ) -> <Wrapping<i16> as BitAnd<Wrapping<i16>>>::Output

Performs the & operation.

impl<'a> BitAnd<&'a Wrapping<u8>> for Wrapping<u8>

type Output = <Wrapping<u8> as BitAnd<Wrapping<u8>>>::Output

The resulting type after applying the & operator.

fn bitand(     self,     other: &'a Wrapping<u8> ) -> <Wrapping<u8> as BitAnd<Wrapping<u8>>>::Output

Performs the & operation.

impl<'a> BitAnd<&'a Wrapping<i8>> for Wrapping<i8>

type Output = <Wrapping<i8> as BitAnd<Wrapping<i8>>>::Output

The resulting type after applying the & operator.

fn bitand(     self,     other: &'a Wrapping<i8> ) -> <Wrapping<i8> as BitAnd<Wrapping<i8>>>::Output

Performs the & operation.

impl<'a> BitAnd<&'a Wrapping<i16>> for Wrapping<i16>

type Output = <Wrapping<i16> as BitAnd<Wrapping<i16>>>::Output

The resulting type after applying the & operator.

fn bitand(     self,     other: &'a Wrapping<i16> ) -> <Wrapping<i16> as BitAnd<Wrapping<i16>>>::Output

Performs the & operation.

impl<'a> BitAnd<&'a Wrapping<u64>> for Wrapping<u64>

type Output = <Wrapping<u64> as BitAnd<Wrapping<u64>>>::Output

The resulting type after applying the & operator.

fn bitand(     self,     other: &'a Wrapping<u64> ) -> <Wrapping<u64> as BitAnd<Wrapping<u64>>>::Output

Performs the & operation.

impl<'a> BitAnd<Wrapping<u64>> for &'a Wrapping<u64>

type Output = <Wrapping<u64> as BitAnd<Wrapping<u64>>>::Output

The resulting type after applying the & operator.

fn bitand(     self,     other: Wrapping<u64> ) -> <Wrapping<u64> as BitAnd<Wrapping<u64>>>::Output

Performs the & operation.

impl<'a, 'b> BitAnd<&'a Wrapping<i32>> for &'b Wrapping<i32>

type Output = <Wrapping<i32> as BitAnd<Wrapping<i32>>>::Output

The resulting type after applying the & operator.

fn bitand(     self,     other: &'a Wrapping<i32> ) -> <Wrapping<i32> as BitAnd<Wrapping<i32>>>::Output

Performs the & operation.

impl<T> UpperHex for Wrapping<T> where     T: UpperHex,

fn fmt(&self, f: &mut Formatter) -> Result<(), Error>

Formats the value using the given formatter.

impl<T> Default for Wrapping<T> where     T: Default,

fn default() -> Wrapping<T>

Returns the "default value" for a type.

impl ShlAssign<usize> for Wrapping<u16>

fn shl_assign(&mut self, other: usize)

Performs the <<= operation.

impl<'a> ShlAssign<&'a usize> for Wrapping<usize>

fn shl_assign(&mut self, other: &'a usize)

Performs the <<= operation.

impl<'a> ShlAssign<&'a usize> for Wrapping<u16>

fn shl_assign(&mut self, other: &'a usize)

Performs the <<= operation.

impl<'a> ShlAssign<&'a usize> for Wrapping<i64>

fn shl_assign(&mut self, other: &'a usize)

Performs the <<= operation.

impl ShlAssign<usize> for Wrapping<isize>

fn shl_assign(&mut self, other: usize)

Performs the <<= operation.

impl<'a> ShlAssign<&'a usize> for Wrapping<i32>

fn shl_assign(&mut self, other: &'a usize)

Performs the <<= operation.

impl ShlAssign<usize> for Wrapping<i8>

fn shl_assign(&mut self, other: usize)

Performs the <<= operation.

impl ShlAssign<usize> for Wrapping<i64>

fn shl_assign(&mut self, other: usize)

Performs the <<= operation.

impl ShlAssign<usize> for Wrapping<usize>

fn shl_assign(&mut self, other: usize)

Performs the <<= operation.

impl<'a> ShlAssign<&'a usize> for Wrapping<i16>

fn shl_assign(&mut self, other: &'a usize)

Performs the <<= operation.

impl ShlAssign<usize> for Wrapping<u64>

fn shl_assign(&mut self, other: usize)

Performs the <<= operation.

impl ShlAssign<usize> for Wrapping<i32>

fn shl_assign(&mut self, other: usize)

Performs the <<= operation.

impl<'a> ShlAssign<&'a usize> for Wrapping<u64>

fn shl_assign(&mut self, other: &'a usize)

Performs the <<= operation.

impl<'a> ShlAssign<&'a usize> for Wrapping<i8>

fn shl_assign(&mut self, other: &'a usize)

Performs the <<= operation.

impl<'a> ShlAssign<&'a usize> for Wrapping<u32>

fn shl_assign(&mut self, other: &'a usize)

Performs the <<= operation.

impl ShlAssign<usize> for Wrapping<u32>

fn shl_assign(&mut self, other: usize)

Performs the <<= operation.

impl ShlAssign<usize> for Wrapping<u8>

fn shl_assign(&mut self, other: usize)

Performs the <<= operation.

impl<'a> ShlAssign<&'a usize> for Wrapping<u8>

fn shl_assign(&mut self, other: &'a usize)

Performs the <<= operation.

impl ShlAssign<usize> for Wrapping<i16>

fn shl_assign(&mut self, other: usize)

Performs the <<= operation.

impl<'a> ShlAssign<&'a usize> for Wrapping<isize>

fn shl_assign(&mut self, other: &'a usize)

Performs the <<= operation.

impl<'a> BitXorAssign<&'a Wrapping<isize>> for Wrapping<isize>

fn bitxor_assign(&mut self, other: &'a Wrapping<isize>)

Performs the ^= operation.

impl BitXorAssign<Wrapping<i64>> for Wrapping<i64>

fn bitxor_assign(&mut self, other: Wrapping<i64>)

Performs the ^= operation.

impl<'a> BitXorAssign<&'a Wrapping<u64>> for Wrapping<u64>

fn bitxor_assign(&mut self, other: &'a Wrapping<u64>)

Performs the ^= operation.

impl<'a> BitXorAssign<&'a Wrapping<usize>> for Wrapping<usize>

fn bitxor_assign(&mut self, other: &'a Wrapping<usize>)

Performs the ^= operation.

impl BitXorAssign<Wrapping<i8>> for Wrapping<i8>

fn bitxor_assign(&mut self, other: Wrapping<i8>)

Performs the ^= operation.

impl BitXorAssign<Wrapping<u16>> for Wrapping<u16>

fn bitxor_assign(&mut self, other: Wrapping<u16>)

Performs the ^= operation.

impl<'a> BitXorAssign<&'a Wrapping<u128>> for Wrapping<u128>

fn bitxor_assign(&mut self, other: &'a Wrapping<u128>)

Performs the ^= operation.

impl<'a> BitXorAssign<&'a Wrapping<i128>> for Wrapping<i128>

fn bitxor_assign(&mut self, other: &'a Wrapping<i128>)

Performs the ^= operation.

impl<'a> BitXorAssign<&'a Wrapping<u16>> for Wrapping<u16>

fn bitxor_assign(&mut self, other: &'a Wrapping<u16>)

Performs the ^= operation.

impl BitXorAssign<Wrapping<u128>> for Wrapping<u128>

fn bitxor_assign(&mut self, other: Wrapping<u128>)

Performs the ^= operation.

impl BitXorAssign<Wrapping<usize>> for Wrapping<usize>

fn bitxor_assign(&mut self, other: Wrapping<usize>)

Performs the ^= operation.

impl BitXorAssign<Wrapping<i128>> for Wrapping<i128>

fn bitxor_assign(&mut self, other: Wrapping<i128>)

Performs the ^= operation.

impl BitXorAssign<Wrapping<isize>> for Wrapping<isize>

fn bitxor_assign(&mut self, other: Wrapping<isize>)

Performs the ^= operation.

impl BitXorAssign<Wrapping<i32>> for Wrapping<i32>

fn bitxor_assign(&mut self, other: Wrapping<i32>)

Performs the ^= operation.

impl BitXorAssign<Wrapping<i16>> for Wrapping<i16>

fn bitxor_assign(&mut self, other: Wrapping<i16>)

Performs the ^= operation.

impl<'a> BitXorAssign<&'a Wrapping<i32>> for Wrapping<i32>

fn bitxor_assign(&mut self, other: &'a Wrapping<i32>)

Performs the ^= operation.

impl<'a> BitXorAssign<&'a Wrapping<i8>> for Wrapping<i8>

fn bitxor_assign(&mut self, other: &'a Wrapping<i8>)

Performs the ^= operation.

impl BitXorAssign<Wrapping<u32>> for Wrapping<u32>

fn bitxor_assign(&mut self, other: Wrapping<u32>)

Performs the ^= operation.

impl<'a> BitXorAssign<&'a Wrapping<i16>> for Wrapping<i16>

fn bitxor_assign(&mut self, other: &'a Wrapping<i16>)

Performs the ^= operation.

impl<'a> BitXorAssign<&'a Wrapping<u8>> for Wrapping<u8>

fn bitxor_assign(&mut self, other: &'a Wrapping<u8>)

Performs the ^= operation.

impl<'a> BitXorAssign<&'a Wrapping<i64>> for Wrapping<i64>

fn bitxor_assign(&mut self, other: &'a Wrapping<i64>)

Performs the ^= operation.

impl BitXorAssign<Wrapping<u64>> for Wrapping<u64>

fn bitxor_assign(&mut self, other: Wrapping<u64>)

Performs the ^= operation.

impl BitXorAssign<Wrapping<u8>> for Wrapping<u8>

fn bitxor_assign(&mut self, other: Wrapping<u8>)

Performs the ^= operation.

impl<'a> BitXorAssign<&'a Wrapping<u32>> for Wrapping<u32>

fn bitxor_assign(&mut self, other: &'a Wrapping<u32>)

Performs the ^= operation.

impl<T> Octal for Wrapping<T> where     T: Octal,

fn fmt(&self, f: &mut Formatter) -> Result<(), Error>

Formats the value using the given formatter.

impl<'a, 'b> Div<&'a Wrapping<u32>> for &'b Wrapping<u32>

type Output = <Wrapping<u32> as Div<Wrapping<u32>>>::Output

The resulting type after applying the / operator.

fn div(     self,     other: &'a Wrapping<u32> ) -> <Wrapping<u32> as Div<Wrapping<u32>>>::Output

Performs the / operation.

impl<'a> Div<Wrapping<u128>> for &'a Wrapping<u128>

type Output = <Wrapping<u128> as Div<Wrapping<u128>>>::Output

The resulting type after applying the / operator.

fn div(     self,     other: Wrapping<u128> ) -> <Wrapping<u128> as Div<Wrapping<u128>>>::Output

Performs the / operation.

impl<'a> Div<Wrapping<i64>> for &'a Wrapping<i64>

type Output = <Wrapping<i64> as Div<Wrapping<i64>>>::Output

The resulting type after applying the / operator.

fn div(     self,     other: Wrapping<i64> ) -> <Wrapping<i64> as Div<Wrapping<i64>>>::Output

Performs the / operation.

impl<'a> Div<&'a Wrapping<i8>> for Wrapping<i8>

type Output = <Wrapping<i8> as Div<Wrapping<i8>>>::Output

The resulting type after applying the / operator.

fn div(     self,     other: &'a Wrapping<i8> ) -> <Wrapping<i8> as Div<Wrapping<i8>>>::Output

Performs the / operation.

impl Div<Wrapping<i128>> for Wrapping<i128>

type Output = Wrapping<i128>

The resulting type after applying the / operator.

fn div(self, other: Wrapping<i128>) -> Wrapping<i128>

Performs the / operation.

impl Div<Wrapping<u16>> for Wrapping<u16>

type Output = Wrapping<u16>

The resulting type after applying the / operator.

fn div(self, other: Wrapping<u16>) -> Wrapping<u16>

Performs the / operation.

impl<'a> Div<Wrapping<isize>> for &'a Wrapping<isize>

type Output = <Wrapping<isize> as Div<Wrapping<isize>>>::Output

The resulting type after applying the / operator.

fn div(     self,     other: Wrapping<isize> ) -> <Wrapping<isize> as Div<Wrapping<isize>>>::Output

Performs the / operation.

impl Div<Wrapping<usize>> for Wrapping<usize>

type Output = Wrapping<usize>

The resulting type after applying the / operator.

fn div(self, other: Wrapping<usize>) -> Wrapping<usize>

Performs the / operation.

impl<'a> Div<&'a Wrapping<i64>> for Wrapping<i64>

type Output = <Wrapping<i64> as Div<Wrapping<i64>>>::Output

The resulting type after applying the / operator.

fn div(     self,     other: &'a Wrapping<i64> ) -> <Wrapping<i64> as Div<Wrapping<i64>>>::Output

Performs the / operation.

impl<'a> Div<Wrapping<i16>> for &'a Wrapping<i16>

type Output = <Wrapping<i16> as Div<Wrapping<i16>>>::Output

The resulting type after applying the / operator.

fn div(     self,     other: Wrapping<i16> ) -> <Wrapping<i16> as Div<Wrapping<i16>>>::Output

Performs the / operation.

impl<'a> Div<Wrapping<i8>> for &'a Wrapping<i8>

type Output = <Wrapping<i8> as Div<Wrapping<i8>>>::Output

The resulting type after applying the / operator.

fn div(self, other: Wrapping<i8>) -> <Wrapping<i8> as Div<Wrapping<i8>>>::Output

Performs the / operation.

impl<'a, 'b> Div<&'a Wrapping<usize>> for &'b Wrapping<usize>

type Output = <Wrapping<usize> as Div<Wrapping<usize>>>::Output

The resulting type after applying the / operator.

fn div(     self,     other: &'a Wrapping<usize> ) -> <Wrapping<usize> as Div<Wrapping<usize>>>::Output

Performs the / operation.

impl<'a> Div<Wrapping<usize>> for &'a Wrapping<usize>

type Output = <Wrapping<usize> as Div<Wrapping<usize>>>::Output

The resulting type after applying the / operator.

fn div(     self,     other: Wrapping<usize> ) -> <Wrapping<usize> as Div<Wrapping<usize>>>::Output

Performs the / operation.

impl Div<Wrapping<i32>> for Wrapping<i32>

type Output = Wrapping<i32>

The resulting type after applying the / operator.

fn div(self, other: Wrapping<i32>) -> Wrapping<i32>

Performs the / operation.

impl<'a, 'b> Div<&'a Wrapping<isize>> for &'b Wrapping<isize>

type Output = <Wrapping<isize> as Div<Wrapping<isize>>>::Output

The resulting type after applying the / operator.

fn div(     self,     other: &'a Wrapping<isize> ) -> <Wrapping<isize> as Div<Wrapping<isize>>>::Output

Performs the / operation.

impl Div<Wrapping<u64>> for Wrapping<u64>

type Output = Wrapping<u64>

The resulting type after applying the / operator.

fn div(self, other: Wrapping<u64>) -> Wrapping<u64>

Performs the / operation.

impl<'a> Div<Wrapping<u8>> for &'a Wrapping<u8>

type Output = <Wrapping<u8> as Div<Wrapping<u8>>>::Output

The resulting type after applying the / operator.

fn div(self, other: Wrapping<u8>) -> <Wrapping<u8> as Div<Wrapping<u8>>>::Output

Performs the / operation.

impl<'a, 'b> Div<&'a Wrapping<i16>> for &'b Wrapping<i16>

type Output = <Wrapping<i16> as Div<Wrapping<i16>>>::Output

The resulting type after applying the / operator.

fn div(     self,     other: &'a Wrapping<i16> ) -> <Wrapping<i16> as Div<Wrapping<i16>>>::Output

Performs the / operation.

impl Div<Wrapping<isize>> for Wrapping<isize>

type Output = Wrapping<isize>

The resulting type after applying the / operator.

fn div(self, other: Wrapping<isize>) -> Wrapping<isize>

Performs the / operation.

impl<'a> Div<&'a Wrapping<u32>> for Wrapping<u32>

type Output = <Wrapping<u32> as Div<Wrapping<u32>>>::Output

The resulting type after applying the / operator.

fn div(     self,     other: &'a Wrapping<u32> ) -> <Wrapping<u32> as Div<Wrapping<u32>>>::Output

Performs the / operation.

impl Div<Wrapping<i64>> for Wrapping<i64>

type Output = Wrapping<i64>

The resulting type after applying the / operator.

fn div(self, other: Wrapping<i64>) -> Wrapping<i64>

Performs the / operation.

impl<'a> Div<&'a Wrapping<i32>> for Wrapping<i32>

type Output = <Wrapping<i32> as Div<Wrapping<i32>>>::Output

The resulting type after applying the / operator.

fn div(     self,     other: &'a Wrapping<i32> ) -> <Wrapping<i32> as Div<Wrapping<i32>>>::Output

Performs the / operation.

impl Div<Wrapping<i16>> for Wrapping<i16>

type Output = Wrapping<i16>

The resulting type after applying the / operator.

fn div(self, other: Wrapping<i16>) -> Wrapping<i16>

Performs the / operation.

impl<'a> Div<&'a Wrapping<usize>> for Wrapping<usize>

type Output = <Wrapping<usize> as Div<Wrapping<usize>>>::Output

The resulting type after applying the / operator.

fn div(     self,     other: &'a Wrapping<usize> ) -> <Wrapping<usize> as Div<Wrapping<usize>>>::Output

Performs the / operation.

impl<'a, 'b> Div<&'a Wrapping<i32>> for &'b Wrapping<i32>

type Output = <Wrapping<i32> as Div<Wrapping<i32>>>::Output

The resulting type after applying the / operator.

fn div(     self,     other: &'a Wrapping<i32> ) -> <Wrapping<i32> as Div<Wrapping<i32>>>::Output

Performs the / operation.

impl<'a, 'b> Div<&'a Wrapping<i128>> for &'b Wrapping<i128>

type Output = <Wrapping<i128> as Div<Wrapping<i128>>>::Output

The resulting type after applying the / operator.

fn div(     self,     other: &'a Wrapping<i128> ) -> <Wrapping<i128> as Div<Wrapping<i128>>>::Output

Performs the / operation.

impl Div<Wrapping<u128>> for Wrapping<u128>

type Output = Wrapping<u128>

The resulting type after applying the / operator.

fn div(self, other: Wrapping<u128>) -> Wrapping<u128>

Performs the / operation.

impl<'a> Div<&'a Wrapping<i16>> for Wrapping<i16>

type Output = <Wrapping<i16> as Div<Wrapping<i16>>>::Output

The resulting type after applying the / operator.

fn div(     self,     other: &'a Wrapping<i16> ) -> <Wrapping<i16> as Div<Wrapping<i16>>>::Output

Performs the / operation.

impl<'a> Div<&'a Wrapping<u64>> for Wrapping<u64>

type Output = <Wrapping<u64> as Div<Wrapping<u64>>>::Output

The resulting type after applying the / operator.

fn div(     self,     other: &'a Wrapping<u64> ) -> <Wrapping<u64> as Div<Wrapping<u64>>>::Output

Performs the / operation.

impl<'a> Div<Wrapping<u64>> for &'a Wrapping<u64>

type Output = <Wrapping<u64> as Div<Wrapping<u64>>>::Output

The resulting type after applying the / operator.

fn div(     self,     other: Wrapping<u64> ) -> <Wrapping<u64> as Div<Wrapping<u64>>>::Output

Performs the / operation.

impl<'a, 'b> Div<&'a Wrapping<u8>> for &'b Wrapping<u8>

type Output = <Wrapping<u8> as Div<Wrapping<u8>>>::Output

The resulting type after applying the / operator.

fn div(     self,     other: &'a Wrapping<u8> ) -> <Wrapping<u8> as Div<Wrapping<u8>>>::Output

Performs the / operation.

impl<'a> Div<Wrapping<i128>> for &'a Wrapping<i128>

type Output = <Wrapping<i128> as Div<Wrapping<i128>>>::Output

The resulting type after applying the / operator.

fn div(     self,     other: Wrapping<i128> ) -> <Wrapping<i128> as Div<Wrapping<i128>>>::Output

Performs the / operation.

impl<'a> Div<Wrapping<u32>> for &'a Wrapping<u32>

type Output = <Wrapping<u32> as Div<Wrapping<u32>>>::Output

The resulting type after applying the / operator.

fn div(     self,     other: Wrapping<u32> ) -> <Wrapping<u32> as Div<Wrapping<u32>>>::Output

Performs the / operation.

impl Div<Wrapping<u32>> for Wrapping<u32>

type Output = Wrapping<u32>

The resulting type after applying the / operator.

fn div(self, other: Wrapping<u32>) -> Wrapping<u32>

Performs the / operation.

impl<'a> Div<&'a Wrapping<u128>> for Wrapping<u128>

type Output = <Wrapping<u128> as Div<Wrapping<u128>>>::Output

The resulting type after applying the / operator.

fn div(     self,     other: &'a Wrapping<u128> ) -> <Wrapping<u128> as Div<Wrapping<u128>>>::Output

Performs the / operation.

impl<'a> Div<&'a Wrapping<i128>> for Wrapping<i128>

type Output = <Wrapping<i128> as Div<Wrapping<i128>>>::Output

The resulting type after applying the / operator.

fn div(     self,     other: &'a Wrapping<i128> ) -> <Wrapping<i128> as Div<Wrapping<i128>>>::Output

Performs the / operation.

impl Div<Wrapping<u8>> for Wrapping<u8>

type Output = Wrapping<u8>

The resulting type after applying the / operator.

fn div(self, other: Wrapping<u8>) -> Wrapping<u8>

Performs the / operation.

impl<'a, 'b> Div<&'a Wrapping<u64>> for &'b Wrapping<u64>

type Output = <Wrapping<u64> as Div<Wrapping<u64>>>::Output

The resulting type after applying the / operator.

fn div(     self,     other: &'a Wrapping<u64> ) -> <Wrapping<u64> as Div<Wrapping<u64>>>::Output

Performs the / operation.

impl<'a, 'b> Div<&'a Wrapping<u16>> for &'b Wrapping<u16>

type Output = <Wrapping<u16> as Div<Wrapping<u16>>>::Output

The resulting type after applying the / operator.

fn div(     self,     other: &'a Wrapping<u16> ) -> <Wrapping<u16> as Div<Wrapping<u16>>>::Output

Performs the / operation.

impl<'a, 'b> Div<&'a Wrapping<i64>> for &'b Wrapping<i64>

type Output = <Wrapping<i64> as Div<Wrapping<i64>>>::Output

The resulting type after applying the / operator.

fn div(     self,     other: &'a Wrapping<i64> ) -> <Wrapping<i64> as Div<Wrapping<i64>>>::Output

Performs the / operation.

impl<'a> Div<&'a Wrapping<u8>> for Wrapping<u8>

type Output = <Wrapping<u8> as Div<Wrapping<u8>>>::Output

The resulting type after applying the / operator.

fn div(     self,     other: &'a Wrapping<u8> ) -> <Wrapping<u8> as Div<Wrapping<u8>>>::Output

Performs the / operation.

impl<'a> Div<&'a Wrapping<isize>> for Wrapping<isize>

type Output = <Wrapping<isize> as Div<Wrapping<isize>>>::Output

The resulting type after applying the / operator.

fn div(     self,     other: &'a Wrapping<isize> ) -> <Wrapping<isize> as Div<Wrapping<isize>>>::Output

Performs the / operation.

impl<'a, 'b> Div<&'a Wrapping<i8>> for &'b Wrapping<i8>

type Output = <Wrapping<i8> as Div<Wrapping<i8>>>::Output

The resulting type after applying the / operator.

fn div(     self,     other: &'a Wrapping<i8> ) -> <Wrapping<i8> as Div<Wrapping<i8>>>::Output

Performs the / operation.

impl<'a> Div<Wrapping<i32>> for &'a Wrapping<i32>

type Output = <Wrapping<i32> as Div<Wrapping<i32>>>::Output

The resulting type after applying the / operator.

fn div(     self,     other: Wrapping<i32> ) -> <Wrapping<i32> as Div<Wrapping<i32>>>::Output

Performs the / operation.

impl<'a> Div<Wrapping<u16>> for &'a Wrapping<u16>

type Output = <Wrapping<u16> as Div<Wrapping<u16>>>::Output

The resulting type after applying the / operator.

fn div(     self,     other: Wrapping<u16> ) -> <Wrapping<u16> as Div<Wrapping<u16>>>::Output

Performs the / operation.

impl<'a> Div<&'a Wrapping<u16>> for Wrapping<u16>

type Output = <Wrapping<u16> as Div<Wrapping<u16>>>::Output

The resulting type after applying the / operator.

fn div(     self,     other: &'a Wrapping<u16> ) -> <Wrapping<u16> as Div<Wrapping<u16>>>::Output

Performs the / operation.

impl Div<Wrapping<i8>> for Wrapping<i8>

type Output = Wrapping<i8>

The resulting type after applying the / operator.

fn div(self, other: Wrapping<i8>) -> Wrapping<i8>

Performs the / operation.

impl<'a, 'b> Div<&'a Wrapping<u128>> for &'b Wrapping<u128>

type Output = <Wrapping<u128> as Div<Wrapping<u128>>>::Output

The resulting type after applying the / operator.

fn div(     self,     other: &'a Wrapping<u128> ) -> <Wrapping<u128> as Div<Wrapping<u128>>>::Output

Performs the / operation.

impl BitOrAssign<Wrapping<isize>> for Wrapping<isize>

fn bitor_assign(&mut self, other: Wrapping<isize>)

Performs the |= operation.

impl<'a> BitOrAssign<&'a Wrapping<i64>> for Wrapping<i64>

fn bitor_assign(&mut self, other: &'a Wrapping<i64>)

Performs the |= operation.

impl BitOrAssign<Wrapping<u32>> for Wrapping<u32>

fn bitor_assign(&mut self, other: Wrapping<u32>)

Performs the |= operation.

impl<'a> BitOrAssign<&'a Wrapping<usize>> for Wrapping<usize>

fn bitor_assign(&mut self, other: &'a Wrapping<usize>)

Performs the |= operation.

impl<'a> BitOrAssign<&'a Wrapping<u128>> for Wrapping<u128>

fn bitor_assign(&mut self, other: &'a Wrapping<u128>)

Performs the |= operation.

impl<'a> BitOrAssign<&'a Wrapping<i128>> for Wrapping<i128>

fn bitor_assign(&mut self, other: &'a Wrapping<i128>)

Performs the |= operation.

impl BitOrAssign<Wrapping<i16>> for Wrapping<i16>

fn bitor_assign(&mut self, other: Wrapping<i16>)

Performs the |= operation.

impl<'a> BitOrAssign<&'a Wrapping<u8>> for Wrapping<u8>

fn bitor_assign(&mut self, other: &'a Wrapping<u8>)

Performs the |= operation.

impl BitOrAssign<Wrapping<u128>> for Wrapping<u128>

fn bitor_assign(&mut self, other: Wrapping<u128>)

Performs the |= operation.

impl BitOrAssign<Wrapping<i8>> for Wrapping<i8>

fn bitor_assign(&mut self, other: Wrapping<i8>)

Performs the |= operation.

impl BitOrAssign<Wrapping<u8>> for Wrapping<u8>

fn bitor_assign(&mut self, other: Wrapping<u8>)

Performs the |= operation.

impl<'a> BitOrAssign<&'a Wrapping<i16>> for Wrapping<i16>

fn bitor_assign(&mut self, other: &'a Wrapping<i16>)

Performs the |= operation.

impl<'a> BitOrAssign<&'a Wrapping<u64>> for Wrapping<u64>

fn bitor_assign(&mut self, other: &'a Wrapping<u64>)

Performs the |= operation.

impl<'a> BitOrAssign<&'a Wrapping<i32>> for Wrapping<i32>

fn bitor_assign(&mut self, other: &'a Wrapping<i32>)

Performs the |= operation.

impl BitOrAssign<Wrapping<u64>> for Wrapping<u64>

fn bitor_assign(&mut self, other: Wrapping<u64>)

Performs the |= operation.

impl BitOrAssign<Wrapping<usize>> for Wrapping<usize>

fn bitor_assign(&mut self, other: Wrapping<usize>)

Performs the |= operation.

impl BitOrAssign<Wrapping<i64>> for Wrapping<i64>

fn bitor_assign(&mut self, other: Wrapping<i64>)

Performs the |= operation.

impl BitOrAssign<Wrapping<u16>> for Wrapping<u16>

fn bitor_assign(&mut self, other: Wrapping<u16>)

Performs the |= operation.

impl<'a> BitOrAssign<&'a Wrapping<u32>> for Wrapping<u32>

fn bitor_assign(&mut self, other: &'a Wrapping<u32>)

Performs the |= operation.

impl BitOrAssign<Wrapping<i128>> for Wrapping<i128>

fn bitor_assign(&mut self, other: Wrapping<i128>)

Performs the |= operation.

impl<'a> BitOrAssign<&'a Wrapping<isize>> for Wrapping<isize>

fn bitor_assign(&mut self, other: &'a Wrapping<isize>)

Performs the |= operation.

impl<'a> BitOrAssign<&'a Wrapping<u16>> for Wrapping<u16>

fn bitor_assign(&mut self, other: &'a Wrapping<u16>)

Performs the |= operation.

impl<'a> BitOrAssign<&'a Wrapping<i8>> for Wrapping<i8>

fn bitor_assign(&mut self, other: &'a Wrapping<i8>)

Performs the |= operation.

impl BitOrAssign<Wrapping<i32>> for Wrapping<i32>

fn bitor_assign(&mut self, other: Wrapping<i32>)

Performs the |= operation.

impl Sum<Wrapping<isize>> for Wrapping<isize>

fn sum<I>(iter: I) -> Wrapping<isize> where     I: Iterator<Item = Wrapping<isize>>,

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl Sum<Wrapping<i64>> for Wrapping<i64>

fn sum<I>(iter: I) -> Wrapping<i64> where     I: Iterator<Item = Wrapping<i64>>,

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl Sum<Wrapping<i16>> for Wrapping<i16>

fn sum<I>(iter: I) -> Wrapping<i16> where     I: Iterator<Item = Wrapping<i16>>,

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl<'a> Sum<&'a Wrapping<isize>> for Wrapping<isize>

fn sum<I>(iter: I) -> Wrapping<isize> where     I: Iterator<Item = &'a Wrapping<isize>>,

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl<'a> Sum<&'a Wrapping<u16>> for Wrapping<u16>

fn sum<I>(iter: I) -> Wrapping<u16> where     I: Iterator<Item = &'a Wrapping<u16>>,

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl<'a> Sum<&'a Wrapping<i8>> for Wrapping<i8>

fn sum<I>(iter: I) -> Wrapping<i8> where     I: Iterator<Item = &'a Wrapping<i8>>,

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl<'a> Sum<&'a Wrapping<i32>> for Wrapping<i32>

fn sum<I>(iter: I) -> Wrapping<i32> where     I: Iterator<Item = &'a Wrapping<i32>>,

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl Sum<Wrapping<usize>> for Wrapping<usize>

fn sum<I>(iter: I) -> Wrapping<usize> where     I: Iterator<Item = Wrapping<usize>>,

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl<'a> Sum<&'a Wrapping<u32>> for Wrapping<u32>

fn sum<I>(iter: I) -> Wrapping<u32> where     I: Iterator<Item = &'a Wrapping<u32>>,

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl Sum<Wrapping<u32>> for Wrapping<u32>

fn sum<I>(iter: I) -> Wrapping<u32> where     I: Iterator<Item = Wrapping<u32>>,

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl Sum<Wrapping<i128>> for Wrapping<i128>

fn sum<I>(iter: I) -> Wrapping<i128> where     I: Iterator<Item = Wrapping<i128>>,

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl<'a> Sum<&'a Wrapping<u64>> for Wrapping<u64>

fn sum<I>(iter: I) -> Wrapping<u64> where     I: Iterator<Item = &'a Wrapping<u64>>,

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl<'a> Sum<&'a Wrapping<usize>> for Wrapping<usize>

fn sum<I>(iter: I) -> Wrapping<usize> where     I: Iterator<Item = &'a Wrapping<usize>>,

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl<'a> Sum<&'a Wrapping<u8>> for Wrapping<u8>

fn sum<I>(iter: I) -> Wrapping<u8> where     I: Iterator<Item = &'a Wrapping<u8>>,

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl Sum<Wrapping<i32>> for Wrapping<i32>

fn sum<I>(iter: I) -> Wrapping<i32> where     I: Iterator<Item = Wrapping<i32>>,

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl Sum<Wrapping<u8>> for Wrapping<u8>

fn sum<I>(iter: I) -> Wrapping<u8> where     I: Iterator<Item = Wrapping<u8>>,

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl Sum<Wrapping<u16>> for Wrapping<u16>

fn sum<I>(iter: I) -> Wrapping<u16> where     I: Iterator<Item = Wrapping<u16>>,

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl<'a> Sum<&'a Wrapping<i16>> for Wrapping<i16>

fn sum<I>(iter: I) -> Wrapping<i16> where     I: Iterator<Item = &'a Wrapping<i16>>,

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl<'a> Sum<&'a Wrapping<u128>> for Wrapping<u128>

fn sum<I>(iter: I) -> Wrapping<u128> where     I: Iterator<Item = &'a Wrapping<u128>>,

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl Sum<Wrapping<i8>> for Wrapping<i8>

fn sum<I>(iter: I) -> Wrapping<i8> where     I: Iterator<Item = Wrapping<i8>>,

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl Sum<Wrapping<u64>> for Wrapping<u64>

fn sum<I>(iter: I) -> Wrapping<u64> where     I: Iterator<Item = Wrapping<u64>>,

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl<'a> Sum<&'a Wrapping<i128>> for Wrapping<i128>

fn sum<I>(iter: I) -> Wrapping<i128> where     I: Iterator<Item = &'a Wrapping<i128>>,

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl<'a> Sum<&'a Wrapping<i64>> for Wrapping<i64>

fn sum<I>(iter: I) -> Wrapping<i64> where     I: Iterator<Item = &'a Wrapping<i64>>,

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl Sum<Wrapping<u128>> for Wrapping<u128>

fn sum<I>(iter: I) -> Wrapping<u128> where     I: Iterator<Item = Wrapping<u128>>,

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl<'a> BitAndAssign<&'a Wrapping<i32>> for Wrapping<i32>

fn bitand_assign(&mut self, other: &'a Wrapping<i32>)

Performs the &= operation.

impl BitAndAssign<Wrapping<i64>> for Wrapping<i64>

fn bitand_assign(&mut self, other: Wrapping<i64>)

Performs the &= operation.

impl<'a> BitAndAssign<&'a Wrapping<u128>> for Wrapping<u128>

fn bitand_assign(&mut self, other: &'a Wrapping<u128>)

Performs the &= operation.

impl BitAndAssign<Wrapping<i16>> for Wrapping<i16>

fn bitand_assign(&mut self, other: Wrapping<i16>)

Performs the &= operation.

impl<'a> BitAndAssign<&'a Wrapping<u8>> for Wrapping<u8>

fn bitand_assign(&mut self, other: &'a Wrapping<u8>)

Performs the &= operation.

impl BitAndAssign<Wrapping<u64>> for Wrapping<u64>

fn bitand_assign(&mut self, other: Wrapping<u64>)

Performs the &= operation.

impl BitAndAssign<Wrapping<u32>> for Wrapping<u32>

fn bitand_assign(&mut self, other: Wrapping<u32>)

Performs the &= operation.

impl BitAndAssign<Wrapping<u16>> for Wrapping<u16>

fn bitand_assign(&mut self, other: Wrapping<u16>)

Performs the &= operation.

impl<'a> BitAndAssign<&'a Wrapping<usize>> for Wrapping<usize>

fn bitand_assign(&mut self, other: &'a Wrapping<usize>)

Performs the &= operation.

impl<'a> BitAndAssign<&'a Wrapping<u32>> for Wrapping<u32>

fn bitand_assign(&mut self, other: &'a Wrapping<u32>)

Performs the &= operation.

impl BitAndAssign<Wrapping<i8>> for Wrapping<i8>

fn bitand_assign(&mut self, other: Wrapping<i8>)

Performs the &= operation.

impl BitAndAssign<Wrapping<usize>> for Wrapping<usize>

fn bitand_assign(&mut self, other: Wrapping<usize>)

Performs the &= operation.

impl<'a> BitAndAssign<&'a Wrapping<i64>> for Wrapping<i64>

fn bitand_assign(&mut self, other: &'a Wrapping<i64>)

Performs the &= operation.

impl BitAndAssign<Wrapping<i32>> for Wrapping<i32>

fn bitand_assign(&mut self, other: Wrapping<i32>)

Performs the &= operation.

impl<'a> BitAndAssign<&'a Wrapping<i128>> for Wrapping<i128>

fn bitand_assign(&mut self, other: &'a Wrapping<i128>)

Performs the &= operation.

impl BitAndAssign<Wrapping<isize>> for Wrapping<isize>

fn bitand_assign(&mut self, other: Wrapping<isize>)

Performs the &= operation.

impl<'a> BitAndAssign<&'a Wrapping<i16>> for Wrapping<i16>

fn bitand_assign(&mut self, other: &'a Wrapping<i16>)

Performs the &= operation.

impl<'a> BitAndAssign<&'a Wrapping<i8>> for Wrapping<i8>

fn bitand_assign(&mut self, other: &'a Wrapping<i8>)

Performs the &= operation.

impl<'a> BitAndAssign<&'a Wrapping<u16>> for Wrapping<u16>

fn bitand_assign(&mut self, other: &'a Wrapping<u16>)

Performs the &= operation.

impl BitAndAssign<Wrapping<i128>> for Wrapping<i128>

fn bitand_assign(&mut self, other: Wrapping<i128>)

Performs the &= operation.

impl BitAndAssign<Wrapping<u8>> for Wrapping<u8>

fn bitand_assign(&mut self, other: Wrapping<u8>)

Performs the &= operation.

impl<'a> BitAndAssign<&'a Wrapping<u64>> for Wrapping<u64>

fn bitand_assign(&mut self, other: &'a Wrapping<u64>)

Performs the &= operation.

impl<'a> BitAndAssign<&'a Wrapping<isize>> for Wrapping<isize>

fn bitand_assign(&mut self, other: &'a Wrapping<isize>)

Performs the &= operation.

impl BitAndAssign<Wrapping<u128>> for Wrapping<u128>

fn bitand_assign(&mut self, other: Wrapping<u128>)

Performs the &= operation.